m (→Source Code) |
m |
||
Line 5: | Line 5: | ||
== Model Equations == | == Model Equations == | ||
+ | :<math>\nabla\cdot\vec{V}=0</math> | ||
+ | :<math>\frac{\partial\vec{V}}{\partial t} + \nabla\cdot\left(\vec{V}\vec{V}\right)= -\frac{1}{\rho}\nabla p + \frac{1}{\rho}\nabla\cdot\vec{\vec{\tau}} + \frac{1}{\rho}\vec{F}_b + \vec{g}</math> | ||
+ | :<math>\vec{\vec{\tau}}=\mu\left(\nabla\vec{V} + \nabla\vec{V}^T\right)</math> | ||
+ | :<math>\vec{F}_b=\rho_E\nabla\vec{E} - \frac{1}{2}\left|\vec{E}\right|^2\nabla\varepsilon</math> | ||
+ | :<math>\frac{\partial \alpha}{\partial t} + \nabla\cdot\left(\alpha\vec{V}\right) = 0</math> | ||
+ | :<math>\varepsilon\nabla\vec{E}=\rho_E</math> | ||
+ | :<math>\vec{E}=-\nabla U_E</math> | ||
+ | :<math>\frac{\partial \rho_E}{\partial t} + \nabla\cdot\left(\rho_E\vec{V}\right) + \frac{\sigma}{\epsilon}\rho_E =0</math> | ||
+ | :<math>\rho=\rho_1\alpha + \rho_2\left(1-\alpha\right) </math> | ||
+ | :<math>\mu=\mu_1\alpha + \mu_2\left(1-\alpha\right) </math> | ||
+ | :<math>\varepsilon=\varepsilon_1\alpha + \varepsilon_2\left(1-\alpha\right) </math> | ||
+ | :<math>\sigma=\sigma_1\alpha + \sigma_2\left(1-\alpha\right) </math> | ||
− | [[Image:Equation.jpg]] | + | <!-- [[Image:Equation.jpg]] the formula shown in the jpg were horrible and inconsistent (different notation was used). i left the link here though --> |
== Source Code == | == Source Code == |
Revision as of 12:52, 1 June 2011
Contents
1 EHDFoam
1.1 Introduction
Electrohydrodynamics deal with fluid motion induced by electric fields. In the mid 1960s G.I. Taylor introduced the leaky dieletric model to explain the behaviour of droplets deformed by steady field, and J.R. Melcher used it extensively to develop electrohydrodynamic. Here, we developed a Numerical model of electrohydrodynamics, the model concides the Taylor-Melcher Leaky Dielectric Model with VOF (Volume of Fraction) method. The Numerical solver was created in OpenFOAM-1.5.
1.2 Model Equations
1.3 Source Code
Sources can be downloaded below: Media:EHDFoam.zip
1.4 How to Install
Compile the EHDTwoPhaseMixture first and then compile EHDFoam.