FAQ/Postprocessing

1 FAQ Section 6: Postprocessing

Working with the results

1.1 Postprocessing of Lagrangian particles

The following subsections describe the basics on how to post-process by Using foamToVTK and by Using paraFoam.

Beyond this, have a look into the tutorial page HowTo Post-process results for particle based methods.

1.1.1 Using foamToVTK

With the latest OpenFOAM and ParaView versions, it's possible to post-process Lagrangian data directly in ParaView. However, if for some reason you cannot open the OpenFOAM case directly in ParaView, the workaround is to use foamToVTK and ParaView's existing ability to handle point data.

Follow these steps:

1. Run the foamToVTK post-processing utility. As with all OpenFOAM programs, it requires at a minimum, the root and case paths.
2. Read in your Eulerian data, if you wish.
3. Read the Lagrangian data separately and 'Glyph' it. Glyphs are how ParaView represents point data. Usually, the sphere glyph is the most appropriate.

The glyphs used to represent particles can be colored and sized to reflect the data associated with the particle. If you cannot see your particles, check that indeed you have represented them as glyphs and that the size scaling you have chosen is adequately large.

1.1.2 Using paraFoam

First you execute paraFoam as usual but you select only in the data to be load the fields and the mesh of the continuous phase.

Then you click on the Open button (or File -> Open in the menu). You select the case.OpenFOAM file created by paraFoam. So you can load again the data of the case. But this time, you select:

In Mesh Parts the lagrangian clouds (be sure that only lagrangian geometries are selected), In Volume Fields unselect everything. In Lagragian Fields select the fields you are interested in.

Example from ParaView using the .OpenFOAM case reader, showing which fields to select.

Then click on the Apply button.

To visualize the particle, use the Glyph filter (cf. end of previous paragraph).

Remark: Should work as of OpenFOAM-1.6 and ParaView 3.6.1.

1.2 Postprocessing of simulations on multiple mesh-regions

Two possibilites to do this are described on How To Postprocess Multiple Regions

1.3 Post-processing multiphase results

OpenFOAM handles multiphase simulations with multiphase flow solver through using a single field that represents the phase present at a certain cell, face or vertex. The field is usually named alpha or alpha1. For more information on how to analyse this field, see this page: How to post-process multiphase results

1.4 Artificial particle tracking in ParaView

This question refers to non-Lagrangian simulations, such as the ones done with icoFoam and simpleFoam, where the objective is to calculate the path that a particle would have if placed inside the flow domain. This is explained in some detail in the following forum post: do particle tracking in paraview? - post #3