User:Hoogs/Installation

From OpenFOAMWiki
< User:Hoogs
Revision as of 14:14, 31 August 2009 by Hoogs (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

1 1.6.x

Now that I routinely make additions and modifications of my local code, and OpenCFD provide a git repository, I no longer use a system wide installation (I now appreciate the wisdom of the OpenCFD recommendation to go with a local installation). Here are notes from a local installation on openSUSE 11.1 with WM_PROJECT_INST_DIR=$HOME/OpenFOAM. I have rarely had a problem-free compilation process (due mainly to differences between linux systems), but usually the errors are easily resolved with a little patience, and the scripting automation is gradually getting better.

cd $WM_PROJECT_INST_DIR
git clone git://repo.or.cz/OpenFOAM-1.6.x.git

This created $WM_PROJECT_INST_DIR/OpenFOAM-1.6.x and $WM_PROJECT_INST_DIR/ThirdParty-1.6. The environment needs to be updated so I added

File: $HOME/.bashrc
...
source $HOME/OpenFOAM/OpenFOAM-1.6.x/etc/bashrc
...

and re-sourced

source ~/.bashrc

then jumped into the OpenFOAM directory and ran the Allwmake script:

cd $WM_PROJECT_INST_DIR/OpenFOAM-1.6.x
./Allwmake 2>&1 > log.wmake.00 &
tail -f log.wmake.00

1.1 First error

The end of the log showed failure

7244 make[2]: *** [/home/hoogland/OpenFOAM/OpenFOAM-1.6.x/applications/bin/linux64GccDPOpt/mixtureAdiabaticFlameT] Error 1
7245 make[2]: Leaving directory `/home/hoogland/OpenFOAM/OpenFOAM-1.6.x/applications/utilities/thermophysical/mixtureAdiabaticFlameT'
7246 make[1]: *** [mixtureAdiabaticFlameT] Error 2
7247 make[1]: Target `application' not remade because of errors.
7248 make[1]: Leaving directory `/home/hoogland/OpenFOAM/OpenFOAM-1.6.x/applications/utilities/thermophysical'
7249 make: *** [thermophysical] Error 2
7250 make: Target `application' not remade because of errors.

But the original error was found by searching for the first appearance of the word "Error", which indicated that mpi.h could not be found to build libPstream. The problem was that the git clone operation had created the directory ThirdParty-1.6 but $WM_THIRD_PARTY_DIR was set to $WM_PROJECT_INST_DIR/ThirdParty-1.6.x. When the directory was renamed, mpi.h was found in $WM_PROJECT_INST_DIR/ThirdParty-1.6.x/openmpi-1.3.3/platforms/linux64GccDPOpt/include. So tried again:

./Allwmake 2>&1 > log.wmake.01 &
tail -f log.wmake.01

Actually, a better solution is probably to use a simlink

ln -s $WM_PROJECT_INST_DIR/ThirdParty-1.6 $WM_PROJECT_INST_DIR/ThirdParty-1.6.x

1.2 Second error

2853 g++ -m64 -Dlinux64 -DWM_DP -Wall -Wno-strict-aliasing -Wextra -Wno-unused-parameter -Wold-style-cast -Wnon-virtual-dtor -O3  -DNoRepository -ftemplate-      >depth-40 -I/home/hoogland/OpenFOAM/OpenFOAM-1.6.x/src /thermophysicalModels/specie/lnInclude -IlnInclude -I. -I/home/hoogland/OpenFOAM/OpenFOAM-1.6.x/       >src/OpenFOAM/lnInclude -I/home/hoogland/OpenFOAM/OpenFOAM-1.6.x/src/OSspecific/POSIX/lnInclude   -fPIC Make/linux64GccDPOpt/mixtureAdiabaticFlameT.o -      >L/home/hoogland/OpenFOAM/OpenFOAM-1.6.x/lib/linux64GccDPOpt \
2854          -lspecie -lOpenFOAM -liberty -ldl   -lm -o /home/hoogland/OpenFOAM/OpenFOAM-1.6.x/applications/bin/linux64GccDPOpt/mixtureAdiabaticFlameT
2855 make[2]: Leaving directory `/home/hoogland/OpenFOAM/OpenFOAM-1.6.x/applications/utilities/thermophysical/mixtureAdiabaticFlameT'
2856 make[1]: Leaving directory `/home/hoogland/OpenFOAM/OpenFOAM-1.6.x/applications/utilities/thermophysical'
2857 make: Target `application' not remade because of errors.

The first sign of a problem was

2531 + cd PV3FoamReader
2532 + mkdir -p Make/linux64GccDPOpt
2533 + cd Make/linux64GccDPOpt
2534 + cmake ../..
2535 ./Allwmake: line 14: cmake: command not found
2536 + make
2537 make[3]: Entering directory `/home/hoogland/OpenFOAM/OpenFOAM-1.6.x/applications/utilities/postProcessing/graphics/PV3FoamReader/PV3FoamReader/Make/         >linux64GccDPOpt'
2538 make[3]: *** No targets specified and no makefile found.  Stop.
2539 make[3]: Leaving directory `/home/hoogland/OpenFOAM/OpenFOAM-1.6.x/applications/utilities/postProcessing/graphics/PV3FoamReader/PV3FoamReader/Make/          >linux64GccDPOpt'
2540 make[2]: *** [PV3FoamReader] Error 2

This was not really an error, since Paraview needs to be built first. So following the README, i.e.

160 * Compiling Paraview 3.6.1 and the PV3FoamReader module
161   If there are problems encountered with ParaView, then it may be necessary to
162   compile ParaView from sources.  The compilation
163   is a fairly simple process using the supplied makeParaView script that
164   has worked in our tests with other packages supplied in the ThirdParty
165   directory, namely cmake-2.6.4 and gcc-4.3.3.  Execute the following:
166   + cd $WM_THIRD_PARTY_DIR
167   + rm -rf paraview-3.6.1/platforms
168   + makeParaView

I got

ParaView_DIR=/home/hoogland/OpenFOAM/ThirdParty-1.6.x/paraview-3.6.1/platforms/linux64Gcc
removing old build/install directory
----
Configuring paraview-3.6.1 (major version: 3.6)
    MPI    support : false
    Python support : false
    MESA   support : false
    Qt dev support : true
    Source         : /home/hoogland/OpenFOAM/ThirdParty-1.6.x/paraview-3.6.1
    Target         : /home/hoogland/OpenFOAM/ThirdParty-1.6.x/paraview-3.6.1/platforms/linux64Gcc
----

cmake -DCMAKE_INSTALL_PREFIX:PATH=/home/hoogland/OpenFOAM/ThirdParty-1.6.x/paraview-3.6.1/platforms/linux64Gcc -DVTK_USE_TK=FALSE -DBUILD_SHARED_LIBS:BOOL=ON -DVTK_USE_RPATH:BOOL=OFF -DCMAKE_BUILD_TYPE:STRING=Release -DPARAVIEW_INSTALL_DEVELOPMENT:BOOL=ON -DPARAVIEW_BUILD_QT_GUI=ON ../..

----
...

because cmake-2.6.4 was not present in the ThirdParty-1.6 directory of the git repo. Apparently cmake is available in the 32-bit ThirdParty download, but I couldn't see it. The easiest thing to do was install a system wide version as root:

cd /tmp
wget  wget http://download.opensuse.org/distribution/11.1/repo/oss/suse/x86_64/cmake-2.6.2-2.19.x86_64.rpm
rpm -ivh cmake-2.6.2-2.19.x86_64.rpm

I wanted to build Paraview with python and mesa support (for off screen rendering) and modified the make script accordingly

File: $WM_PROJECT_INST_DIR/ThirdParty-1.6.x/makeParaView
 44 # Python support:
 45 # note: script will try to determine the appropriate python library.
 46 #       If it fails, specify the path using the PYTHON_LIBRARY variable
 47 withPYTHON=true
 48 #PYTHON_LIBRARY=""
 49 PYTHON_LIBRARY="$HOME/opt/Python-2.5.4/lib/libpython2.5.so.1.0"
 50 PYTHON_INCLUDE="$HOME/opt/Python-2.5.4/include/python2.5"
 51 
 52 # MESA graphics support:
 53 withMESA=true
 54 MESA_INCLUDE="/usr/include/GL"
 55 MESA_LIBRARY="/usr/lib64/libOSMesa.so"

I added PYTHON_INCLUDE because I have a non-standard Python installation

File: $WM_PROJECT_INST_DIR/ThirdParty-1.6.x/tools/makeParaViewFunctions
114         if [ -n "$PYTHON_INCLUDE" ]
115         then 
116             pythonInclude=$PYTHON_INCLUDE
117             # check $PYTHON_INCLUDE if it has been set
118             if [ ! -d "$pythonInclude" ]
119             then 
120                 echo "*** Error: python include dir not found at location specified " \
121                      "by PYTHON_INCLUDE=$pythonInclude"
122             fi
123         else
124             pythonInclude=/usr/include/python$pythonMajor
125             if [ ! -e "$pythonInclude" ]
126             then
127                echo "*** Error: Unable to determine path to python include dir."
128             fi
129         fi