View source for Of-extend/Update SourceForge Repositories

Due to a change in the software at [http://sourceforge.net Sourceforge] the locations of the source repositories of the [https://sourceforge.net/projects/openfoam-extend/ OpenFOAM-extend project] have changed. If you checked out sources from there before January 2013 you either check them out into a new local copy and discard the local copy or you have to modify the local copies you have

== Mercurial (hg) ==

This only concerns the [[Contrib/swak4Foam swak4Foam]] development version,

Open the file <tt>.hg/hgrc</tt> and change the line
 default = http://openfoam-extend.hg.sourceforge.net:8000/hgroot/openfoam-extend/swak4Foam
to
 default = http://hg.code.sf.net/p/openfoam-extend/swak4Foam
If you are planning to push changes either use (replace <tt>foobar</tt> with your Sourceforge username)
 default = https://foobar@hg.code.sf.net/p/openfoam-extend/swak4Foam
or
 default = ssh://foobar@hg.code.sf.net/p/openfoam-extend/swak4Foam

== Subversion (svn) ==

This concerns a number of projects that were checked out through partial checkout from the SVN-repository

* Go to the root of the working copy
* Check original path
 svn info
* Relocate the repository (adapt first part according to the info in <tt>svn info</tt>). Different forms:
; plain read access : If you are only pulling sources
 svn relocate https://openfoam-extend.svn.sourceforge.net/svnroot/openfoam-extend/ svn://svn.code.sf.net/p/openfoam-extend/svn/
; http access : if your organization restricts the ports
 svn relocate https://openfoam-extend.svn.sourceforge.net/svnroot/openfoam-extend/ https://svn.code.sf.net/p/openfoam-extend/svn/
; read/write access : if you are going to push changes (replace <tt>foouser</tt> with your SourceForge user name)
 svn relocate https://openfoam-extend.svn.sourceforge.net/svnroot/openfoam-extend/ svn+ssh://foouser@svn.code.sf.net/p/openfoam-extend/svn/
* Make sure that you're up to date
 svn update

== Git ==

The following GIT projects can now be reached under new URLs:
* DensityBasedTurbo
* ShipHydroSIG
* UsbStickCreation
* OpenFOAM-1.6-ext

Here are the commands necessary to reset the project remote URL of your local copies.

=== Project DensityBasedTurbo ===
* Go to the root of the repository copy

; plain read access : If you are only pulling sources
 git remote set-url origin git://git.code.sf.net/p/openfoam-extend/DensityBasedTurbo
; http access : if your organization restricts the ports
 git remote set-url origin https://git.code.sf.net/p/openfoam-extend/DensityBasedTurbo
; read/write access : if you are going to push changes (replace <tt>foouser</tt> with your SourceForge user name)
 git remote set-url origin ssh://foouser@git.code.sf.net/p/openfoam-extend/DensityBasedTurbo

;Make sure you are up to date
 git pull origin

;To start fresh with new clone repository, just follow the instructions here: 
http://sourceforge.net/p/openfoam-extend/DensityBasedTurbo/ci/master/tree/

=== Project ShipHydroSIG ===
* Go to the root of the repository copy

; plain read access : If you are only pulling sources
 git remote set-url origin git://git.code.sf.net/p/openfoam-extend/ShipHydroSIG
; http access : if your organization restricts the ports
 git remote set-url origin https://git.code.sf.net/p/openfoam-extend/ShipHydroSIG
; read/write access : if you are going to push changes (replace <tt>foouser</tt> with your SourceForge user name)
 git remote set-url origin ssh://foouser@git.code.sf.net/p/openfoam-extend/ShipHydroSIG

;Make sure you are up to date
 git pull origin

;To start fresh with new clone repository, just follow the instructions here: 
http://sourceforge.net/p/openfoam-extend/ShipHydroSIG/ci/master/tree/

=== Project UsbStickCreation ===
* Go to the root of the repository copy

; plain read access : If you are only pulling sources
 git remote set-url origin git://git.code.sf.net/p/openfoam-extend/UsbStickCreation
; http access : if your organization restricts the ports
 git remote set-url origin https://git.code.sf.net/p/openfoam-extend/UsbStickCreation
; read/write access : if you are going to push changes (replace <tt>foouser</tt> with your SourceForge user name)
 git remote set-url origin ssh://foouser@git.code.sf.net/p/openfoam-extend/UsbStickCreation

;Make sure you are up to date
 git pull origin

;To start fresh with new clone repository, just follow the instructions here: 
http://sourceforge.net/p/openfoam-extend/UsbStickCreation/ci/master/tree/

=== Project OpenFOAM-1.6-ext ===

This project requires more than changing the remote URL. Six files were removed from the repository, including their complete histories. In order to reflect those changes on your current repository, you will need to use the following commands. 

* Go to the root of the repository copy

; plain read access : If you are only pulling sources
 git remote set-url origin git://git.code.sf.net/p/openfoam-extend/OpenFOAM-1.6-ext
; http access : if your organization restricts the ports
 git remote set-url origin https://git.code.sf.net/p/openfoam-extend/OpenFOAM-1.6-ext
; read/write access : if you are going to push changes (replace <tt>foouser</tt> with your SourceForge user name)
 git remote set-url origin ssh://foouser@git.code.sf.net/p/openfoam-extend/OpenFOAM-1.6-ext
or if your organization restricts the ports
 git remote set-url origin https://foouser@git.code.sf.net/p/openfoam-extend/OpenFOAM-1.6-ext

;Make sure you are up to date
 git pull '''--rebase''' origin