View source for Installation/Linux/OpenFOAM+-v1606+/Ubuntu

= Introduction =
This page is dedicated to explaining how to install {{OpenFOAM+}} {{version1606+}} in [http://www.ubuntu.com Ubuntu].

If you do not yet feel comfortable using Linux, then perhaps you better first read the page [[Installation/Working with the Shell|Working with the Shell]] and train a bit with the shell/terminal environments, so you can have a better perception of the steps shown below.

__FORCETOC__
__TOC__

= ''Copy-Paste'' steps =

A few notes before you start copy-pasting:

# Lines that start with <tt>#</tt> don't have to be ''copy-pasted''. They are just comments to let you know what's going on.
# One wrong character is enough for breaking this guide, so make sure you can read the characters properly or that the installed language system does not break the copied characters!

== Ubuntu 16.04 ==

Here you have the following choices:
* You can install from source, by either:
** Following the official instructions from here: [http://openfoam.com/download/install-source.php OpenFOAM+ Installation From Source]
** Or by following the detailed step-by-step instructions below...


'''Discussion thread where you can ask questions about these steps''': {{Installation/NoThreadAskForum}}

Steps:
<ol>
{{Installation/Linux/SwitchToRoot}}
{{Installation/Linux/AptGetUpdate}}
<li>Install the necessary packages:
<bash>apt-get install build-essential binutils-dev cmake flex bison zlib1g-dev qt4-dev-tools libqt4-dev libqtwebkit-dev gnuplot \
libreadline-dev libncurses-dev libxt-dev libopenmpi-dev openmpi-bin libgmp-dev libmpfr-dev python python-dev
</bash>
'''Note''': It has been reported that the following should also be executed in some cases, so that ParaView and CGAL will build properly:
<bash>apt-get install libglu1-mesa-dev libqt4-opengl-dev</bash>
</li>

{{Installation/Linux/ExitRoot}}

<li>Download and unpack (here you can copy-paste all in single go):
<bash>#OpenFOAM+ downloading and installation
cd ~
mkdir OpenFOAM
cd OpenFOAM
wget "http://downloads.sourceforge.net/openfoamplus/files/OpenFOAM-v1606%2B.tgz?use_mirror=mesh" -O OpenFOAM-v1606+.tgz
wget "http://downloads.sourceforge.net/openfoamplus/files/ThirdParty-v1606%2B.tgz?use_mirror=mesh" -O ThirdParty-v1606+.tgz

tar -xzf OpenFOAM-v1606+.tgz
tar -xzf ThirdParty-v1606+.tgz
</bash></li>

<li>'''Optional''': Let's make a few symbolic links that should ensure that the correct global MPI installation is used by this OpenFOAM+ installation:
<bash>ln -s /usr/bin/mpicc.openmpi OpenFOAM-v1606+/bin/mpicc
ln -s /usr/bin/mpirun.openmpi OpenFOAM-v1606+/bin/mpirun</bash>
This way we avoid having problems in case there is more than one MPI toolbox installed in your Ubuntu system, for example if MPICH2 is installed and is the default MPI toolbox.
</li>

<li>For building OpenFOAM+ itself, it depends on whether you have installed the i686 or x86_64 architecture of Ubuntu. To check this, run:
<bash>uname -m</bash>
Now, accordingly:
<ul {{NoIndentStyle}}>
<li>For i686:
<bash>source $HOME/OpenFOAM/OpenFOAM-v1606+/etc/bashrc WM_ARCH_OPTION=32
</bash></li>

<li>For x86_64, it depends on whether you need 64-bit integer support or not:
<ul {{NoIndentStyle}}>
<li>For building with the normal 32-bit integer support (maximum 2.147×10<sup>9</sup> cells, faces or points):
<bash>source $HOME/OpenFOAM/OpenFOAM-v1606+/etc/bashrc
</bash>
</li>
<li>For building with the normal 64-bit integer support (maximum 9.22×10<sup>18</sup> cells, faces or points):
<bash>source $HOME/OpenFOAM/OpenFOAM-v1606+/etc/bashrc WM_LABEL_SIZE=64
</bash>
</li>
</ul>
</li>
</ul>
</li>

<li>Save an ''alias'' in the personal {{tt|.bashrc}} file, simply by running the following command:
<bash>echo "alias of1606+='source \$HOME/OpenFOAM/OpenFOAM-v1606+/etc/bashrc $FOAM_SETTINGS'" >> $HOME/.bashrc
</bash>
{{Installation/Linux/AliasNote|OpenFOAM+ v1606+|of1606+}}
</li>

<li>Now let's build the {{tt|ThirdParty}} folder, because we need the shell environment to be updated afterwards, for CGAL to be properly picked up for building OpenFOAM+:
<bash>cd $WM_THIRD_PARTY_DIR

#make very certain that the correct Qt version is being used, by running this command:
export QT_SELECT=qt4

#we need a little fix for FFTW
sed -i -e 's=unset _foamAddPath=unset -f _foamAddPath=' makeFFTW

# This next command will take a while... somewhere between 5 minutes to 30 minutes.
./Allwmake > log.make 2>&1

#update the shell environment
wmREFRESH
</bash>
</li>

<li>Now, in order to build ParaView 5.0.1, including with the ability to use Python and MPI, several steps are needed:
<ol>
<li>Make sure you're running in the {{tt|ThirdParty}} folder and that the correct Qt version is used:
<bash>cd $WM_THIRD_PARTY_DIR
export QT_SELECT=qt4
 </bash>
</li>
<li>For building ParaView with Python and MPI, it depends on whether you have installed the i686 or x86_64 architecture of Ubuntu. To check this, run:
<bash>uname -m</bash>
Now, accordingly:
<ul {{NoIndentStyle}}>
<li>For i686:
<bash>#this will take a while... somewhere between 30 minutes to 2 hours or more
./makeParaView -python -mpi -python-lib /usr/lib/i386-linux-gnu/libpython2.7.so.1.0 > log.makePV 2>&1</bash>
</li>

<li>For x86_64:
<bash>#this will take a while... somewhere between 30 minutes to 2 hours or more
./makeParaView -python -mpi -python-lib /usr/lib/x86_64-linux-gnu/libpython2.7.so.1.0 > log.makePV 2>&1</bash>
</li>
</ul>
</li>
<li>Once the {{tt|makeParaView}} script is finished running, make sure to check the contents of the file {{tt|log.makePV}} and check if there are any errors.
</li>
<li>Finally, update the shell environment:
<bash>wmREFRESH</bash>
</li>
</ol>
</li>

<li>Now let's build OpenFOAM+:
<ol>
<li>Go into OpenFOAM+'s main source folder and be certain that the correct Qt version is being used:
<bash>cd $WM_PROJECT_DIR
export QT_SELECT=qt4</bash>
</li>

<li>This next command will take a while... somewhere between 30 minutes to 3-6 hours:
<bash>./Allwmake -j 4 > log.make 2>&1</bash>
{{Installation/Linux/NumberOfCores}}
</li>
<li>Run it a second time for getting a summary of the installation:
<bash>./Allwmake -j 4 > log.make 2>&1</bash>
'''Note:''' Technically, the build will stop as soon as the first error is found. Running a second time only makes it easier to sort through between what's already been built and where the crash occurred.
</li>
</ol>
</li>

<li>{{Installation/Linux/CheckIfAllWentWell}}</li>

<li>{{Installation/ReadUserGuideEtAl_ESI-OpenCFD}}</li>
</ol>


{{Installation/Linux/AliasReminder|OpenFOAM+ v1606+|of1606+}}


'''Discussion thread where you can ask questions about these steps''': {{Installation/NoThreadAskForum}}

[[Category:Installing OpenFOAM on Linux]] [[Category:Installing OpenFOAM on Ubuntu]]