Of-extend/Update SourceForge Repositories

Due to a change in the software at Sourceforge the locations of the source repositories of the OpenFOAM-extend project have changed. If you checked out sources from there before January 2013 you either check them out into a new local copy and discard the local copy or you have to modify the local copies you have

1 Mercurial (hg)

This only concerns the Contrib/swak4Foam swak4Foam development version,

Open the file .hg/hgrc and change the line

default = http://openfoam-extend.hg.sourceforge.net:8000/hgroot/openfoam-extend/swak4Foam

to

default = http://hg.code.sf.net/p/openfoam-extend/swak4Foam

If you are planning to push changes either use (replace foobar with your Sourceforge username)

default = https://foobar@hg.code.sf.net/p/openfoam-extend/swak4Foam

or

default = ssh://foobar@hg.code.sf.net/p/openfoam-extend/swak4Foam

2 Subversion (svn)

This concerns a number of projects that were checked out through partial checkout from the SVN-repository

• Go to the root of the working copy
• Check original path

svn info

• Relocate the repository (adapt first part according to the info in svn info). Different forms:

plain read access 

If you are only pulling sources

svn relocate https://openfoam-extend.svn.sourceforge.net/svnroot/openfoam-extend/ svn://svn.code.sf.net/p/openfoam-extend/svn/

http access 

if your organization restricts the ports

svn relocate https://openfoam-extend.svn.sourceforge.net/svnroot/openfoam-extend/ https://svn.code.sf.net/p/openfoam-extend/svn/

read/write access 

if you are going to push changes (replace foouser with your SourceForge user name)

svn relocate https://openfoam-extend.svn.sourceforge.net/svnroot/openfoam-extend/ svn+ssh://foouser@svn.code.sf.net/p/openfoam-extend/svn/

• Make sure that you're up to date

svn update

3 Git

The following GIT projects can now be reached under new URLs:

• DensityBasedTurbo
• ShipHydroSIG
• UsbStickCreation
• OpenFOAM-1.6-ext

Here are the commands necessary to reset the project remote URL of your local copies.

3.1 Project DensityBasedTurbo

• Go to the root of the repository copy

plain read access 

If you are only pulling sources

git remote set-url origin git://git.code.sf.net/p/openfoam-extend/DensityBasedTurbo

http access 

if your organization restricts the ports

git remote set-url origin https://git.code.sf.net/p/openfoam-extend/DensityBasedTurbo

read/write access 

if you are going to push changes (replace foouser with your SourceForge user name)

git remote set-url origin ssh://foouser@git.code.sf.net/p/openfoam-extend/DensityBasedTurbo

Make sure you are up to date

git pull origin

To start fresh with new clone repository, just follow the instructions here

http://sourceforge.net/p/openfoam-extend/DensityBasedTurbo/ci/master/tree/

3.2 Project ShipHydroSIG

• Go to the root of the repository copy

plain read access 

If you are only pulling sources

git remote set-url origin git://git.code.sf.net/p/openfoam-extend/ShipHydroSIG

http access 

if your organization restricts the ports

git remote set-url origin https://git.code.sf.net/p/openfoam-extend/ShipHydroSIG

read/write access 

if you are going to push changes (replace foouser with your SourceForge user name)

git remote set-url origin ssh://foouser@git.code.sf.net/p/openfoam-extend/ShipHydroSIG

Make sure you are up to date

git pull origin

To start fresh with new clone repository, just follow the instructions here

http://sourceforge.net/p/openfoam-extend/ShipHydroSIG/ci/master/tree/

3.3 Project UsbStickCreation

• Go to the root of the repository copy

plain read access 

If you are only pulling sources

git remote set-url origin git://git.code.sf.net/p/openfoam-extend/UsbStickCreation

http access 

if your organization restricts the ports

git remote set-url origin https://git.code.sf.net/p/openfoam-extend/UsbStickCreation

read/write access 

if you are going to push changes (replace foouser with your SourceForge user name)

git remote set-url origin ssh://foouser@git.code.sf.net/p/openfoam-extend/UsbStickCreation

Make sure you are up to date

git pull origin

To start fresh with new clone repository, just follow the instructions here

http://sourceforge.net/p/openfoam-extend/UsbStickCreation/ci/master/tree/

3.4 Project OpenFOAM-1.6-ext

This project requires more than changing the remote URL. Six files were removed from the repository, including their complete histories. In order to reflect those changes on your current repository, you will need to use the following commands.

• Go to the root of the repository copy

plain read access 

If you are only pulling sources

git remote set-url origin git://git.code.sf.net/p/openfoam-extend/OpenFOAM-1.6-ext

http access 

if your organization restricts the ports

git remote set-url origin https://git.code.sf.net/p/openfoam-extend/OpenFOAM-1.6-ext

read/write access 

if you are going to push changes (replace foouser with your SourceForge user name)

git remote set-url origin ssh://foouser@git.code.sf.net/p/openfoam-extend/OpenFOAM-1.6-ext

or if your organization restricts the ports

git remote set-url origin https://foouser@git.code.sf.net/p/openfoam-extend/OpenFOAM-1.6-ext

Make sure you are up to date

git pull --rebase origin