Difference between revisions of "ContribDieselFoamInjectorPropertiesMultiHoleInjectorAngleSpacing"
From OpenFOAMWiki
(New page: Back The spacing between the holes. Each value defines the angle to the next hole in a counter-clockwise direction. The position of the 'first' hol...) |
|||
| Line 1: | Line 1: | ||
[[contribDieselFoamInjectorProperties|Back]] | [[contribDieselFoamInjectorProperties|Back]] | ||
| − | The spacing between the holes. Each value defines the angle to the next hole in a counter-clockwise direction. | + | The spacing between the holes. |
| + | Each value defines the angle to the next hole in a counter-clockwise direction around the injector direction. | ||
The position of the 'first' hole is defined by the angle to the reference plane/axis. | The position of the 'first' hole is defined by the angle to the reference plane/axis. | ||
This plane is defined by the injector direction and the vector in the xy-plane, i.e xyAngle. | This plane is defined by the injector direction and the vector in the xy-plane, i.e xyAngle. | ||
Revision as of 14:58, 10 December 2008
The spacing between the holes. Each value defines the angle to the next hole in a counter-clockwise direction around the injector direction. The position of the 'first' hole is defined by the angle to the reference plane/axis.
This plane is defined by the injector direction and the vector in the xy-plane, i.e xyAngle.
