Difference between revisions of "Contrib AlignMeshSurf"
From OpenFOAMWiki
Line 28: | Line 28: | ||
* write the new mesh for next time step | * write the new mesh for next time step | ||
− | == | + | |
+ | == Examples == | ||
+ | === alignMeshTest case === | ||
+ | [[Media:alignMeshTest.tar.gz|Case gzipped]] | ||
+ | |||
Original mesh (only a cut) and surfaces of a test case | Original mesh (only a cut) and surfaces of a test case | ||
Line 36: | Line 40: | ||
[[Image:alignMeshSurf_newMesh.jpg]] | [[Image:alignMeshSurf_newMesh.jpg]] | ||
+ | |||
+ | === scourCylinder case '''TODO'''=== | ||
+ | |||
+ | |||
+ | The case still needs a description. It uses the <tt>m4</tt> preprocessor for original mesh generation. It may be useful for those simulating flow around cylinders or piers, especially with a scoured bed. | ||
+ | |||
+ | Sources and mesh view are provided below. | ||
+ | |||
+ | |||
+ | [[Media:AlignMeshSurf_scourCylinder.tar.gz|Case gzipped]] | ||
+ | |||
+ | [[Image:alignMeshSurf_cylMesh.jpg]] | ||
== Download == | == Download == | ||
− | [[Media:alignMeshSurf.tar.gz| | + | [[Media:alignMeshSurf.tar.gz|A tar file with the alignMeshSurf sources]]. Works with OpenFOAM 1.3. |
− | |||
--[[User:Rpasiok|Rpasiok]] 18:25, 22 Nov 2006 (CET) | --[[User:Rpasiok|Rpasiok]] 18:25, 22 Nov 2006 (CET) |
Revision as of 14:55, 25 November 2006
Contents
1 Short description
Moves mesh points in the Z direction so that the bottom and top faces are aligned with provided surfaces,
2 Usage
Needs two inputs:
- lower and
- upper surface file name
The code assumes the following about the original mesh and the surfaces:
- both surfaces have to cover original mesh in the XY-plane - it needs surfaces height Z for XY-position of each mesh point
- internal mesh points keep their relative distance between bottom and top faces - the original relative distance is based on mesh bounding box rather than local faces height. It is good idea to have your original top and bottom faces flat (const Z).
The command
alignMeshSurf . alignMeshTest bottomSurf.stl topSurf.ftr
will :
- take alignMeshTest case mesh for startFrom time,
- align the bottom mesh face with bottomSurf.stl surface and the top mesh face with topSurf.ftr surface
- move internal mesh points vertically and
- write the new mesh for next time step
3 Examples
3.1 alignMeshTest case
Original mesh (only a cut) and surfaces of a test case
and the aligned mesh
3.2 scourCylinder case TODO
The case still needs a description. It uses the m4 preprocessor for original mesh generation. It may be useful for those simulating flow around cylinders or piers, especially with a scoured bed.
Sources and mesh view are provided below.
4 Download
A tar file with the alignMeshSurf sources. Works with OpenFOAM 1.3.
--Rpasiok 18:25, 22 Nov 2006 (CET)