Difference between revisions of "Contrib AlignMeshSurf"
|Line 41:||Line 41:|
=== scourCylinder case
=== scourCylinder case ===
== Download ==
== Download ==
Latest revision as of 12:00, 27 November 2006
1 Short description
Moves mesh points in the Z direction so that the bottom and top faces are aligned with provided surfaces,
Needs two inputs:
- lower and
- upper surface file name
The code assumes the following about the original mesh and the surfaces:
- both surfaces have to cover original mesh in the XY-plane - it needs surfaces height Z for XY-position of each mesh point
- internal mesh points keep their relative distance between bottom and top faces - the original relative distance is based on mesh bounding box rather than local faces height. It is good idea to have your original top and bottom faces flat (const Z).
alignMeshSurf . alignMeshTest bottomSurf.stl topSurf.ftr
- take alignMeshTest case mesh for startFrom time,
- align the bottom mesh face with bottomSurf.stl surface and the top mesh face with topSurf.ftr surface
- move internal mesh points vertically and
- write the new mesh for next time step
3.1 alignMeshTest case
Original mesh (only a cut) and surfaces of a test case
and the aligned mesh
3.2 scourCylinder case
This case may be useful for those simulating flow around cylinders or piers, especially with a scoured irregular bed.
The m4 preprocessor is used for initial mesh generation - there is a scheme of mesh blocks and flow domain dimensions in the tar file. If you need explanation on the preprocessing, please, see HowTo_blockMesh_with_m4.
Create the initial mesh with blockMesh and move the points with:
alignMeshSurf . scourCylinder Scour.stl Top.stl
The new mesh is written to 0.005 directory (deltaT). Change the startTime value in the controlDict and you can now start the simulation - the case is defined for icoFoam solver.
A tar file with the alignMeshSurf sources. Works with OpenFOAM 1.3.
--Rpasiok 18:25, 22 Nov 2006 (CET)