Difference between revisions of "Contrib gmsh2ToFoam"
From OpenFOAMWiki
| Line 10: | Line 10: | ||
For feedback and discussion go to [http://openfoam.cfd-online.com/forum/messages/1/3841.html this thread] on the Message Board. | For feedback and discussion go to [http://openfoam.cfd-online.com/forum/messages/1/3841.html this thread] on the Message Board. | ||
| + | |||
| + | ==Technical== | ||
| + | |||
| + | The only known incompatibility with the original <tt>gmshToFoam</tt> is that <tt>gmsh2ToFoam</tt> produces a fatal error if the mesh contains second-order elements, instead of silently ignoring them. This is simply due to saving my programming time of some 10 minutes so I could change the behavior upon request. | ||
==Download== | ==Download== | ||
Revision as of 23:55, 16 February 2007
Valid versions: 
1 Short Description
A modified gmshToFoam with support to .msh file format version 2.0 (ASCII type only) introduced in gmsh-2.0.0.
2 Usage
Identical to the original gmshToFoam. Gmsh2ToFoam can also handle the conventional (version 1.0) .msh file format and automatically determines the format version.
For feedback and discussion go to this thread on the Message Board.
3 Technical
The only known incompatibility with the original gmshToFoam is that gmsh2ToFoam produces a fatal error if the mesh contains second-order elements, instead of silently ignoring them. This is simply due to saving my programming time of some 10 minutes so I could change the behavior upon request.
4 Download
5 History
First Upload: 7islands 13:28, 16 Feb 2007 (CET)
