Events

From OpenFOAMWiki
Revision as of 01:40, 11 September 2013 by Bgschaid (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

If you want to add a new event enter the title of the event below. It will then be added as a subpage of Events. If an event with the same title already exists you will be asked to edit this page. Therefor try to make the title of the event unique (for instance instead of "Middleearth User Group Meeting" write "5th Middleearth User Group Meeting" or "Middleearth User Group Meeting - Spring 2014").

In the form that comes up enter a one or two sentence summary of the event. This will appear on the title page and is limited in size so make sure that it gives a good summary that will interest people. The long text can be as long as you want to. It will be visible when the full event is viewed. The date of the event is used to sort the list of news. An optional end date as well as an URL to the page of the event (if it exists) can be specified. Specification of a location is mandatory.


For the manual markup of event see this article

1 List of old events

This only lists the last 10 events

1.1 Events/15th International OpenFOAM Workshop

Date: 2020/06/22 Location: George Mason University, Virginia, USA

The Workshop Committee would like to invite you to the 15th International OpenFOAM® Workshop to be held at Arlington, Virginia, USA from June 22 - 25, 2020

Start of Event 2020/06/22
End of Event 2020/06/25
Location George Mason University, Virginia, USA
URL http://openfoamworkshop.org/


1.2 1st preCICE Workshop

Date: 2020/02/17 Location: Technical University of Munich, Germany

Join the 1st international preCICE Workshop at the Technical University of Munich, Germany on February 17-18, 2020 to learn how to couple OpenFOAM with other solvers and frameworks (including CalculiX, FEniCS, deal.II, and more) and discuss about partitioned Fluid-Structure Interaction, Conjugate Heat Transfer, and more coupled problems with the international preCICE community.

Start of Event 2020/02/17
End of Event 2020/02/18
Location Technical University of Munich, Germany
URL https://www.precice.org/preCICE2020/


1.3 PFAU 19 Austrian User Meeting

26 November, 2019 in Leoben, Austria

The OpenFOAM User Meeting v. 19 in Leoben is scheduled for Tuesday, November 26, 2019 (9.30 a.m. - 15.00 p.m.)

It will take place at this address:

Chair for Modelling and Simulation of Metallurgical Processes
Department of Metallurgy
Metallurgiegebäude 3.OG
ISN Raum 313
University of Leoben
Franz-Josef Strasse 18
8700 Leoben Austria 


See full article for a map with directions



1.4 Events/13th International OpenFOAM Workshop

Date: 2018/06/24 Location: Shanghai Jiao Tong University, China

The Workshop Committee would like to invite you to the 13th International OpenFOAM® Workshop to be held at Shanghai Jiao Tong University, China, from June 24-29 2018

Start of Event 2018/06/24
End of Event 2018/06/29
Location Shanghai Jiao Tong University, China
URL http://openfoamworkshop.org/


1.5 PFAU 15 Austrian User Meeting

11 December, 2017 in Leoben, Austria

The OpenFOAM User Meeting 15 in Leoben is scheduled for Monday, December 11, 2017 (9:00 a.m. - 16:30 p.m.)

It will take place at this address:

Seminarraum Eisen 
Metallurgiegebäude 2.OG
University of Leoben
Franz-Josef Strasse 18
8700 Leoben Austria 


See full article for a map with directions



For participation please contact Alexander Vakhrushev: alexander.vakhrushev at unileoben.ac.at




2 Summary of the PFAU 15 Meeting

I would like to thank all participants and especially the presenters! It is always a pleasure to meet you all. Our geography now extended till Tirol! We had different topics but with common interests in the multiphase, turbulence and heat transfer modeling. The general OpenFOAM topics were presented, as well as a comparison of the modeling and the experimental work.

At the BoF session the Tutorial Collection was discussed. A possibility of the OpenFOAM Tutorial Subforum at the CFD-Online was considered. These actions will be continued.

For the authors of the tutorial materials it would be valuable to fill in the "Further Reading" section.

It was also suggested to possibly add validation cases in the Tutorial and mark them with a corresponding flag.

OpenFOAM version compatibilities are still an issue, and many user stressed that they have to keep their solver with the old releases (e.g. 2.3x) to make their code running.


It was reminded to subscribe to the Austrian User Group Mailing list to stay up-to-day with Community activities.

OpenFOAM mailing lists


Looking to see you next time!

Sincerely,

Alexander


3 Presentations

You can check the available presentations at the following link:

PFAU 15 Presentations


4 Next Meeting

Beforehand the next PFAU is planned for the summer time 2018 and will be held in Linz. Please follow the announcements.


4.1 Events/12th International OpenFOAM Workshop

Date: 2017/07/24 Location: University of Exeter, Great Britain, Europe

The Workshop Committee would like to invite you to the 12th International OpenFOAM® Workshop to be held at University of Exeter, Great Britain, Europe, from July 24-July 27, 2017.

Start of Event 2017/07/24
End of Event 2017/07/27
Location University of Exeter, Great Britain, Europe
URL http://openfoamworkshop.org/


4.2 Events/PFAU 14 Austrian User Meeting

Date: 2017/07/06 Location: Address: 8010 Graz, Inffeldgasse 21a Room: IMEG 140

The OpenFOAM User Meeting v. 14 will take place at the Virtual Vehicle in Graz. All Foamers or anyone who is interested are welcome. If you want to participate or need further information please email to alexander.kospach@v2c2.at

Start of Event 2017/07/06
End of Event 2017/07/06
Location Address: 8010 Graz, Inffeldgasse 21a

Room: IMEG 140

URL

Final Agenda https://openfoamwiki.net/index.php/File:2017_PFAU14_Agenda_V2.pdf

4.3 Events/11th International OpenFOAM Workshop

Date: 2016/06/26 Location: Centro Cultural Vila Flor, Guimarães, Portugal, Europe

The Workshop Committee would like to invite you to the 11th International OpenFOAM® Workshop to be held at Centro Cultural Vila Flor, Guimarães, Portugal, Europe, from June 26-June 30, 2016.

Start of Event 2016/06/26
End of Event 2016/06/30
Location Centro Cultural Vila Flor, Guimarães, Portugal, Europe
URL http://www.openfoamworkshop.org/


4.4 PFAU 11 Austrian User Meeting

26 November, 2015 in Leoben, Austria

The OpenFOAM User Meeting v. 11 in Leoben is scheduled for Thursday, November 26, 2015 (9.30 a.m. - 16.30 p.m.)

It will take place at this address:

Chair for Modelling and Simulation of Metallurgical Processes
Department of Metallurgy
Metallurgiegebäude 3.OG
Seminarraum 325
University of Leoben
Franz-Josef Strasse 18
8700 Leoben Austria 


See full article for a map with directions



4.5 Events/10th International OpenFOAM Workshop

Date: 2015/06/29 Location: Ann Arbor, Michigan USA

The Workshop Committee would like to invite you to the 10th International OpenFOAM® Workshop to be held in Ann Arbor, MI, USA, from June 29-July 2, 2015.

Start of Event 2015/06/29
End of Event 2015/07/02
Location Ann Arbor, Michigan USA
URL http://www.ofw10.org


View older events