Difference between revisions of "Of-extend/Update SourceForge Repositories"

Revision as of 02:09, 1 June 2013

This page is work in progress.

Due to a change in the software at Sourceforge the locations of the source repositories of the OpenFOAM-extend project have changed. If you checked out sources from there before January 2013 you either check them out into a new local copy and discard the local copy or you have to modify the local copies you have

1 Mercurial (hg)

This only concerns the Contrib/swak4Foam swak4Foam development version,

Open the file .hg/hgrc and change the line

default = http://openfoam-extend.hg.sourceforge.net:8000/hgroot/openfoam-extend/swak4Foam

to

default = http://hg.code.sf.net/p/openfoam-extend/swak4Foam

If you are planning to push changes either use (replace foobar with your Sourceforge username)

default = https://foobar@hg.code.sf.net/p/openfoam-extend/swak4Foam

or

default = ssh://foobar@hg.code.sf.net/p/openfoam-extend/swak4Foam

2 Subversion (svn)

This concerns a number of projects that were checked out through partial checkout from the SVN-repository

• Go to the root of the working copy
• Check original path

svn info

• Relocate the repository (adapt first part according to the info in svn info). Different forms:

plain read access 

If you are only pulling sources

svn relocate https://openfoam-extend.svn.sourceforge.net/svnroot/openfoam-extend/ svn://svn.code.sf.net/p/openfoam-extend/svn/

http access 

if your organization restricts the ports

svn relocate https://openfoam-extend.svn.sourceforge.net/svnroot/openfoam-extend/ https://svn.code.sf.net/p/openfoam-extend/svn/

read/write access 

if you are going to push changes (replace foouser with your SourceForge user name)

svn relocate https://openfoam-extend.svn.sourceforge.net/svnroot/openfoam-extend/ svn+ssh://foouser@svn.code.sf.net/p/openfoam-extend/svn/

• Make sure that you're up to date

svn update

3 Git

The following GIT projects can now be reached under new URLs:

• DensityBasedTurbo
• ShipHydroSIG
• UsbStickCreation
• OpenFOAM-1.6-ext

Here are the commands necessary to reset the project remote URL of your local copies.

3.1 Project DensityBasedTurbo

plain read access 

If you are only pulling sources

git remote set-url origin git://git.code.sf.net/p/openfoam-extend/DensityBasedTurbo

http access 

if your organization restricts the ports

git remote set-url origin https://git.code.sf.net/p/openfoam-extend/DensityBasedTurbo

read/write access 

if you are going to push changes (replace foouser with your SourceForge user name)

git remote set-url origin ssh://foouser@git.code.sf.net/p/openfoam-extend/DensityBasedTurbo

Make sure you are up to date

git pull origin

To start fresh with new clone repositories, just follow the instructions here

http://sourceforge.net/p/openfoam-extend/DensityBasedTurbo/ci/master/tree/