OpenFOAM guide/The SIMPLE algorithm in OpenFOAM

1 The SIMPLE algorithm

The Navier-Stokes equations for a single-phase flow with a constant density and viscosity are the following:

$\nabla \cdot \left( \rho \vec{U} \right) = 0$

$\frac{\partial U}{\partial t} + \nabla \cdot \left( \vec{v} \vec{v} \right) - \nabla \cdot \left( \nu \nabla \vec{v} \right) = - \nabla p$

The solution of this couple of equations is not straightforward because an explicit equation for the pressure is not available. One of the most common approaches is to derive an equation for the pressure by taking the divergence of the momentum equation and by substituting it in the continuity equation.

The momentum equation can be re-written in a semi discretized form as follows:

$a_p \vec{U_p} = H(\vec{U}) - \nabla p \Longleftrightarrow \vec{U_p} = \frac{H(\vec{U})}{a_p} - \frac{\nabla p}{a_p}$

where

$H(\vec{U}) = - \sum_n a_n \vec{U}_n + \frac{\vec{U}^o}{\Delta t}$

The first term of $H(\vec{U})$ represents the matrix coefficients of the neighbouring cells multiplied by their velocity, while the second part contains the unsteady term and all the sources except the pressure gradient.

The continuity equation is discretized as:

$\nabla \cdot \vec{U} = \sum_f \vec{S} \vec{U}_f$

where $\vec{S}$ is outward-pointing face area vector and $U_f$ the velocity on the face.