Difference between revisions of "SIG Nuclear / Publications"

From OpenFOAMWiki
Line 3: Line 3:
 
== Papers ==
 
== Papers ==
 
<ul>
 
<ul>
<li> [http://dx.doi.org/doi:10.1016/j.compfluid.2013.10.001] A. Sakowitz et al. Effects of velocity ratio and inflow pulsations on the flow in a T-junction by Large Eddy Simulation. Annals of Nuclear Energy, Vol. 68, pp. 247–256 (2013).
+
<li> [http://dx.doi.org/10.1016/j.compfluid.2013.10.001] A. Sakowitz et al. Effects of velocity ratio and inflow pulsations on the flow in a T-junction by Large Eddy Simulation. Annals of Nuclear Energy, Vol. 68, pp. 247–256 (2013).
<li> [http://dx.doi.org/doi:10.1016/j.anucene.2013.12.019] K. Jareteg et al. Fine-mesh deterministic modeling of PWR fuel assemblies: Proof-of-principle of coupled neutronic/thermal–hydraulic calculations. Annals of Nuclear Energy, Vol. 68, pp. 247–256 (2014).
+
<li> [http://dx.doi.org/10.1016/j.nucengdes.2013.08.070] H. Wilkening, L. Ammirabile. Simulation of helium release in the Battelle Model Containment facility using OpenFOAM. Nuclear Engineering and Design, Vol. 265, pp. 402– 410 (2013).
<li> [http://dx.doi.org/doi:10.1016/j.anucene.2013.10.015] M. Aufiero et al. Calculating the effective delayed neutron fraction in the Molten Salt Fast Reactor: Analytical, deterministic and Monte Carlo approaches. Annals of Nuclear Energy, Vol. 65, pp. 78–90 (2014).
+
<li> [http://dx.doi.org/10.1016/j.anucene.2013.10.015] M. Aufiero et al. Calculating the effective delayed neutron fraction in the Molten Salt Fast Reactor: Analytical, deterministic and Monte Carlo approaches. Annals of Nuclear Energy, Vol. 65, pp. 78–90 (2014).
<li> [http://dx.doi.org/doi:10.1016/j.nucengdes.2013.08.070] H. Wilkening, L. Ammirabile. Simulation of helium release in the Battelle Model Containment facility using OpenFOAM. Nuclear Engineering and Design, Vol. 265, pp. 402– 410 (2013).
+
<li> [http://dx.doi.org/10.1016/j.anucene.2013.12.019] K. Jareteg et al. Fine-mesh deterministic modeling of PWR fuel assemblies: Proof-of-principle of coupled neutronic/thermal–hydraulic calculations. Annals of Nuclear Energy, Vol. 68, pp. 247–256 (2014).
 +
<li> [http://dx.doi.org/10.14741/ijcet/spl.2.2014.82] G. Harikrishnan et al. CFD Simulation of Subcooled Flow Boiling using OpenFOAM. International Journal of Current Engineering and Technology, Special Issue-2, pp. 441-447 2014.
 +
</ul>
  
  
<li> [http://dx.doi.org/doi:] Authors. Title. Journal/Proceedings. Comment.
+
<li> [http://dx.doi.org/] Authors. Title. Journal/Proceedings. Comment.
</ul>
+
 
  
 
== Slides ==
 
== Slides ==
  
 
<ul>
 
<ul>
<li> [http://dx.doi.org/doi:] Klas Jareteg. Multiphysics simulations of Light Water Reactors using OpenFOAM, presented at the [http://www.openfoamworkshop.org/ 9th OpenFOAM Workshop] in Zagreb, June 2014.
+
<li> [http://www.woodruffscientific.com/files/ElisabetMasDeLesValls.pdf] E. Mas de les Valls, L. Batet. OpenFOAM capabilities for MHD simulation under nuclear fusion technology conditions, presented at the [http://www.openfoamworkshop.org/2014/ 3rd OpenFOAM Workshop] in Milan, July 2008.
 +
 
 +
<li> [http://virtual.vtt.fi/virtual/safir2010/vasenpalkki/finalseminar/Presentations/Thursday/Area_4/NuFoam_SAFIR2010.pdf] J. Peltola et al. Adaptation and validation of
 +
OpenFOAM® CFD-solvers for nuclear safety related flow simulations, presented at the SAFIR2010 Seminar, Espoo, March 2011.
 +
</ul>
 +
 
 +
<li> [http://klas.nephy.chalmers.se/publications/presentations/KlasJareteg-OF-GBG-Web.pdf] K. Jareteg. Coupled calculations in OpenFOAM - Multiphysics handling, structures and solvers, presented at the Gothenburg Region OpenFOAM User Group Meeting, November 2012.
 +
 
 +
<li> [http://dx.doi.org/] Klas Jareteg. Multiphysics simulations of Light Water Reactors using OpenFOAM, presented at the [http://www.openfoamworkshop.org/ 9th OpenFOAM Workshop] in Zagreb, June 2014.
 
<li> [http://registration.sdewes.org/ofw09/dfile.php?dm=Pxfa78bf8889b66c4f3f257b4c68c1fbb541157860x3] I. Clifford et al. A Hierarchical Multi-scale Approach to Modelling Heat Conduction in Prismatic HTGRs using OpenFOAM , presented at the [http://www.openfoamworkshop.org/ 9th OpenFOAM Workshop] in Zagreb, June 2014.
 
<li> [http://registration.sdewes.org/ofw09/dfile.php?dm=Pxfa78bf8889b66c4f3f257b4c68c1fbb541157860x3] I. Clifford et al. A Hierarchical Multi-scale Approach to Modelling Heat Conduction in Prismatic HTGRs using OpenFOAM , presented at the [http://www.openfoamworkshop.org/ 9th OpenFOAM Workshop] in Zagreb, June 2014.
 
<li> [http://registration.sdewes.org/ofw09/dfile.php?dm=Pxe3ef290aa5b1ab98749e0beb1e53b45b80fecaf2x2] J. Herb. Coupling of OpenFOAM with Thermo-Hydraulic Simulation Code ATHLET, presented at the [http://www.openfoamworkshop.org/2014/ 9th OpenFOAM Workshop] in Zagreb, June 2014.
 
<li> [http://registration.sdewes.org/ofw09/dfile.php?dm=Pxe3ef290aa5b1ab98749e0beb1e53b45b80fecaf2x2] J. Herb. Coupling of OpenFOAM with Thermo-Hydraulic Simulation Code ATHLET, presented at the [http://www.openfoamworkshop.org/2014/ 9th OpenFOAM Workshop] in Zagreb, June 2014.
 
<li> [http://registration.sdewes.org/ofw09/dfile.php?dm=Pxeeb5579a74c9c158901fdbd6bf5e1883a7cab215x2] C. Fiorina et al.  
 
<li> [http://registration.sdewes.org/ofw09/dfile.php?dm=Pxeeb5579a74c9c158901fdbd6bf5e1883a7cab215x2] C. Fiorina et al.  
 
Development plans and first steps for a multi-physics platform for nuclear reactor analysis, presented at the [http://www.openfoamworkshop.org/2014/ 9th OpenFOAM Workshop] in Zagreb, June 2014.
 
Development plans and first steps for a multi-physics platform for nuclear reactor analysis, presented at the [http://www.openfoamworkshop.org/2014/ 9th OpenFOAM Workshop] in Zagreb, June 2014.
 
+
<li> [http://dx.doi.org/] Authors. Title, presented at the [http://www.openfoamworkshop.org/2014/ 9th OpenFOAM Workshop] in Zagreb, June 2014.
<li> [http://dx.doi.org/doi:] Authors. Title, presented at the [http://www.openfoamworkshop.org/2014/ 9th OpenFOAM Workshop] in Zagreb, June 2014.
+
</ul>
 
</ul>
 
</ul>
  
Line 27: Line 37:
  
 
<ul>
 
<ul>
<li> [http://dx.doi.org/doi:] Authors. Title, presented at the [http://www.openfoamworkshop.org/2014/ 9th OpenFOAM Workshop] in Zagreb, June 2014.
+
<li> [http://dx.doi.org/] Authors. Title, presented at the [http://www.openfoamworkshop.org/2014/ 9th OpenFOAM Workshop] in Zagreb, June 2014.
 +
</ul>
 +
 
 +
== Thesis ==
 +
 
 +
<ul>
 +
<li> [http://www.diva-portal.org/smash/get/diva2:408153/FULLTEXT01.pdf] E. Michta. Modeling of Subcooled Nucleate Boiling with OpenFOAM. KTH Royal Institute of Technology, Stockholm. February 2011.
 +
<li> [http://www.tnw.tudelft.nl/fileadmin/Faculteit/TNW/Over_de_faculteit/Afdelingen/Radiation_Radionuclides_Reactors/Research/Research_Groups/NERA/Publications/doc/BSc_Tom_Bakx.pdf] T. Bakx. Testing a Nuclear Pebble-Bed Reactor Model in OpenFOAM. Delft University of Technology. August 2011.
 +
<li> [http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:91-diss-20140221-1172612-0-2] A. Alali. Development and validation of new solver based on the interfacial area transport equation for the numerical simulation of sub-cooled boiling with OpenFOAM CFD code for nuclear safety applications. Technische Universität München. August 2013.
 +
 
 +
<li> [http://dx.doi.org/] Authors. Title. University. Month 20xx.
 
</ul>
 
</ul>
  
  
 
Back to [[Sig Nuclear]]
 
Back to [[Sig Nuclear]]

Revision as of 11:30, 1 July 2014

Here you can add links (or references) to publications with OpenFOAM for nuclear applications.

1 Papers

  • [1] A. Sakowitz et al. Effects of velocity ratio and inflow pulsations on the flow in a T-junction by Large Eddy Simulation. Annals of Nuclear Energy, Vol. 68, pp. 247–256 (2013).
  • [2] H. Wilkening, L. Ammirabile. Simulation of helium release in the Battelle Model Containment facility using OpenFOAM. Nuclear Engineering and Design, Vol. 265, pp. 402– 410 (2013).
  • [3] M. Aufiero et al. Calculating the effective delayed neutron fraction in the Molten Salt Fast Reactor: Analytical, deterministic and Monte Carlo approaches. Annals of Nuclear Energy, Vol. 65, pp. 78–90 (2014).
  • [4] K. Jareteg et al. Fine-mesh deterministic modeling of PWR fuel assemblies: Proof-of-principle of coupled neutronic/thermal–hydraulic calculations. Annals of Nuclear Energy, Vol. 68, pp. 247–256 (2014).
  • [5] G. Harikrishnan et al. CFD Simulation of Subcooled Flow Boiling using OpenFOAM. International Journal of Current Engineering and Technology, Special Issue-2, pp. 441-447 2014.


  • [6] Authors. Title. Journal/Proceedings. Comment.

    2 Slides

    • [7] E. Mas de les Valls, L. Batet. OpenFOAM capabilities for MHD simulation under nuclear fusion technology conditions, presented at the 3rd OpenFOAM Workshop in Milan, July 2008.
    • [8] J. Peltola et al. Adaptation and validation of OpenFOAM® CFD-solvers for nuclear safety related flow simulations, presented at the SAFIR2010 Seminar, Espoo, March 2011.
  • [9] K. Jareteg. Coupled calculations in OpenFOAM - Multiphysics handling, structures and solvers, presented at the Gothenburg Region OpenFOAM User Group Meeting, November 2012.
  • [10] Klas Jareteg. Multiphysics simulations of Light Water Reactors using OpenFOAM, presented at the 9th OpenFOAM Workshop in Zagreb, June 2014.
  • [11] I. Clifford et al. A Hierarchical Multi-scale Approach to Modelling Heat Conduction in Prismatic HTGRs using OpenFOAM , presented at the 9th OpenFOAM Workshop in Zagreb, June 2014.
  • [12] J. Herb. Coupling of OpenFOAM with Thermo-Hydraulic Simulation Code ATHLET, presented at the 9th OpenFOAM Workshop in Zagreb, June 2014.
  • [13] C. Fiorina et al. Development plans and first steps for a multi-physics platform for nuclear reactor analysis, presented at the 9th OpenFOAM Workshop in Zagreb, June 2014.
  • [14] Authors. Title, presented at the 9th OpenFOAM Workshop in Zagreb, June 2014. </ul> </ul>

    3 Posters

    4 Thesis

    • [16] E. Michta. Modeling of Subcooled Nucleate Boiling with OpenFOAM. KTH Royal Institute of Technology, Stockholm. February 2011.
    • [17] T. Bakx. Testing a Nuclear Pebble-Bed Reactor Model in OpenFOAM. Delft University of Technology. August 2011.
    • [18] A. Alali. Development and validation of new solver based on the interfacial area transport equation for the numerical simulation of sub-cooled boiling with OpenFOAM CFD code for nuclear safety applications. Technische Universität München. August 2013.
    • [19] Authors. Title. University. Month 20xx.


    Back to Sig Nuclear