Difference between revisions of "Sig Turbomachinery / Meetings"

From OpenFOAMWiki
(Year 2012)
 
(6 intermediate revisions by the same user not shown)
Line 1: Line 1:
 
== Year 2012 ==
 
== Year 2012 ==
  
A meeting was held during the [http://openfoam-extend.sourceforge.net/OpenFOAM_Workshops/OFW7_2012_Darmstadt/OFW7.html 7th OpenFOAM Workshop] (Technische Universität Darmstadt, Darmstadt, Germany), on June 28.
+
A meeting was held during the [http://openfoam-extend.sourceforge.net/OpenFOAM_Workshops/OFW7_2012_Darmstadt/OFW7.html 7th OpenFOAM Workshop] (Technische Universität Darmstadt, Darmstadt, Germany), on June 28. It should be noted that there was also a [http://sourceforge.net/projects/openfoam-extend/files/OpenFOAM_Workshops/OFW7_2012_Darmstadt/Training/HakanNilsson Turbomachinery training at OFW7], a training course held on June 25. There was also a Turbomachinery session held on June 26 (see [http://sourceforge.net/projects/openfoam-extend/files/OpenFOAM_Workshops/OFW7_2012_Darmstadt/Workshop-Documents/OFWS7-programSchedule.pdf/download OFWS7-programSchedule]).
  
There were presentations and discussions about the [http://openfoamwiki.net/index.php/Sig_Turbomachinery_Feature_MixingPlane_Interface_OpenFOAM-1.6-ext mixingPlane interface] available under the git branch mixingPlane_RC1 under OpenFOAM-1.6-ext. The slides that were presented during the meeting are available under [http://sourceforge.net/projects/openfoam-extend/files/OpenFOAM_Workshops/OFW7_2012_Darmstadt/Workshop-Documents/CommunityDay/SIG-Turbo/ Workshop-Documents/CommunityDay/SIG_Turbo ].
+
During the Turbomachinery meeting, there were presentations and discussions about the [http://openfoamwiki.net/index.php/Sig_Turbomachinery_Feature_MixingPlane_Interface_OpenFOAM-1.6-ext mixingPlane interface] available under the git branch mixingPlane_RC1 under OpenFOAM-1.6-ext. The slides that were presented during the meeting are available under [http://sourceforge.net/projects/openfoam-extend/files/OpenFOAM_Workshops/OFW7_2012_Darmstadt/Workshop-Documents/CommunityDay/SIG-Turbo/ Workshop-Documents/CommunityDay/SIG_Turbo ].
  
 
Agenda of the meeting:
 
Agenda of the meeting:
* [http://sourceforge.net/projects/openfoam-extend/files/OpenFOAM_Workshops/OFW7_2012_Darmstadt/Workshop-Documents/CommunityDay/SIG-Turbo/Final-MarysePage-OFTurboOFW7Report-SlidesOFW7.pdf/download Introduction to the OpenFOAM Turbomachinery Working Group]
+
* [http://sourceforge.net/projects/openfoam-extend/files/OpenFOAM_Workshops/OFW7_2012_Darmstadt/Workshop-Documents/CommunityDay/SIG-Turbo/Final-MarysePage-OFTurboOFW7Report-SlidesOFW7.pdf Introduction to the OpenFOAM Turbomachinery Working Group]
 
* The mixingPlane interface :
 
* The mixingPlane interface :
 
** [http://sourceforge.net/projects/openfoam-extend/files/OpenFOAM_Workshops/OFW7_2012_Darmstadt/Workshop-Documents/CommunityDay/SIG-Turbo/Final-MartinBeaudoin-OFTurboWGIntroMixingPlane-SlidesOFW7./download Quick introduction]
 
** [http://sourceforge.net/projects/openfoam-extend/files/OpenFOAM_Workshops/OFW7_2012_Darmstadt/Workshop-Documents/CommunityDay/SIG-Turbo/Final-MartinBeaudoin-OFTurboWGIntroMixingPlane-SlidesOFW7./download Quick introduction]
 
** DomAdomB testcases
 
** DomAdomB testcases
 
*** [http://sourceforge.net/projects/openfoam-extend/files/OpenFOAM_Workshops/OFW7_2012_Darmstadt/Workshop-Documents/CommunityDay/SIG-Turbo/Final-MarysePage-OFTurboOFW7domAdomB-SlidesOFW7.pdf Or various ways to compute and to connect periodic flow passages]
 
*** [http://sourceforge.net/projects/openfoam-extend/files/OpenFOAM_Workshops/OFW7_2012_Darmstadt/Workshop-Documents/CommunityDay/SIG-Turbo/Final-MarysePage-OFTurboOFW7domAdomB-SlidesOFW7.pdf Or various ways to compute and to connect periodic flow passages]
*** [http://sourceforge.net/projects/openfoam-extend/files/OpenFOAM_Workshops/OFW7_2012_Darmstadt/Workshop-Documents/CommunityDay/SIG-Turbo/Final-MarysePage-OFTurboOFW7domAdomBBehaviousMiixingPlane-SlidesOFW7.pdf/download Behaviour of the mixingPlane]
+
*** [http://sourceforge.net/projects/openfoam-extend/files/OpenFOAM_Workshops/OFW7_2012_Darmstadt/Workshop-Documents/CommunityDay/SIG-Turbo/Final-MarysePage-OFTurboOFW7domAdomBBehaviousMiixingPlane- Behaviour of the mixingPlane]
*** [http://sourceforge.net/projects/openfoam-extend/files/OpenFOAM_Workshops/OFW7_2012_Darmstadt/Workshop-Documents/CommunityDay/SIG-Turbo/Final-ChristopheDevalsOFW7-SIG-turboMachinery.pdf/download Hybrid meshes]
+
*** [http://sourceforge.net/projects/openfoam-extend/files/OpenFOAM_Workshops/OFW7_2012_Darmstadt/Workshop-Documents/CommunityDay/SIG-Turbo/Final-ChristopheDevalsOFW7-SIG-turboMachinery.pdf Hybrid meshes]
** [http://sourceforge.net/projects/openfoam-extend/files/OpenFOAM_Workshops/OFW7_2012_Darmstadt/Workshop-Documents/CommunityDay/SIG-Turbo/Final-MartinBeaudoin-OFTurboWGInsideTheMixingPlaneInterface-SlidesOFW7.pdf/download Inside the mixingPlane interface]
+
** [http://sourceforge.net/projects/openfoam-extend/files/OpenFOAM_Workshops/OFW7_2012_Darmstadt/Workshop-Documents/CommunityDay/SIG-Turbo/Final-MartinBeaudoin-OFTurboWGInsideTheMixingPlaneInterfac Inside the mixingPlane interface]
 
* Contributions, presentations, discussion from the audience
 
* Contributions, presentations, discussion from the audience
  
Line 20: Line 20:
 
== Year 2011 ==
 
== Year 2011 ==
  
A meeting was held during the [http://www.openfoamworkshop.org/2010 6th OpenFOAM Workshop] (Penn State University, State College, Pennsylvania, USA), on June 16.
+
A meeting was held during the [http://sourceforge.net/projects/openfoam-extend/files/OpenFOAM_Workshops/OFW6_2011_PennState/ 6th OpenFOAM Workshop] (Penn State University, State College, Pennsylvania, USA), on June 16.
  
 
There has been an update on the mixingPlane interface development for steady-state computations and on the Timisoara Swirling Flow Test Rig Case-Study.
 
There has been an update on the mixingPlane interface development for steady-state computations and on the Timisoara Swirling Flow Test Rig Case-Study.
Line 26: Line 26:
 
== Year 2010==
 
== Year 2010==
  
A meeting was held during the [http://www.openfoamworkshop.org/2010 5th OpenFOAM Workshop] in Gothenburg, Sweden, on June 24, 2010. For more informations, see the [http://web.student.chalmers.se/groups/ofw5/Program.htm Working Group Activities].
+
A meeting was held during the [http://sourceforge.net/projects/openfoam-extend/files/OpenFOAM_Workshops/OFW5_2010_Gothenburg/ 5th OpenFOAM Workshop] in Gothenburg, Sweden, on June 24, 2010. For more informations, see the [http://web.student.chalmers.se/groups/ofw5/Program.htm Working Group Activities].
  
 
Two were two new testcases, the Timisoara Swirl Generator and the Single Pump Channel. More information can be found here: [http://openfoamwiki.net/index.php/Sig_Turbomachinery_/_Timisoara_Swirl_Generator Timisoara Swirl Generator] and [http://openfoamwiki.net/index.php/Sig_Turbomachinery_/_Single_Channel_Pump Single Channel Pump].
 
Two were two new testcases, the Timisoara Swirl Generator and the Single Pump Channel. More information can be found here: [http://openfoamwiki.net/index.php/Sig_Turbomachinery_/_Timisoara_Swirl_Generator Timisoara Swirl Generator] and [http://openfoamwiki.net/index.php/Sig_Turbomachinery_/_Single_Channel_Pump Single Channel Pump].
Line 36: Line 36:
 
== Year 2009==
 
== Year 2009==
  
A meeting was held during the [http://www.openfoamworkshop.org/2009 Fourth OpenFOAM workshop] in Montreal, Canada, on June 4 2009.
+
A meeting was held during the [http://sourceforge.net/projects/openfoam-extend/files/OpenFOAM_Workshops/OFW4_2009_Montreal/ Fourth OpenFOAM workshop] in Montreal, Canada, on June 4 2009.
  
 
The second testcase is the ERCOFTAC centrifugal pump with a vaned diffuser case-study. More information can be found here: [[Sig Turbomachienry / ERCOFTAC centrifugal pump with a vaned diffuser |ERCOFTAC centrifugal pump with a vaned diffuser]].
 
The second testcase is the ERCOFTAC centrifugal pump with a vaned diffuser case-study. More information can be found here: [[Sig Turbomachienry / ERCOFTAC centrifugal pump with a vaned diffuser |ERCOFTAC centrifugal pump with a vaned diffuser]].
  
 
== Year 2008==
 
== Year 2008==
A meeting was held at the [http://www.openfoamworkshop.org/08/index.php5?title=Turbomachinery Turbomachinery session] of the [http://www.openfoamworkshop.org/08/index.php5 Third OpenFOAM workshop] in Milano, July 10-11, 2008. The talks presented in the Turbomachinery session are directly available through [http://www.openfoamworkshop.org/08/index.php5?title=Main_Page Workshop Sessions]
+
A meeting was held at the [http://sourceforge.net/projects/openfoam-extend/files/OpenFOAM_Workshops/OFW3_2008_Milan/Presentations/Turbomachinery Turbomachinery session] of the [http://sourceforge.net/projects/openfoam-extend/files/OpenFOAM_Workshops/OFW3_2008_Milan/ Third OpenFOAM workshop] in Milano, July 10-11, 2008. The talks presented in the Turbomachinery session are directly available through [http://sourceforge.net/projects/openfoam-extend/files/OpenFOAM_Workshops/OFW3_2008_Milan/Presentations/ Workshop Sessions]
  
 
The first testcase is the ERCOFTAC conical diffuser case-study. More information can be found here: [[Sig Turbomachinery / ERCOFTAC conical diffuser |ERCOFTAC conical diffuser]].
 
The first testcase is the ERCOFTAC conical diffuser case-study. More information can be found here: [[Sig Turbomachinery / ERCOFTAC conical diffuser |ERCOFTAC conical diffuser]].
Line 47: Line 47:
 
== Year 2007==
 
== Year 2007==
  
The group was officially started at the [http://www.openfoamworkshop.org/2007/index.php?title=Main_Page second OpenFOAM workshop] in Zagreb, 2007.
+
The group was officially started at the [http://sourceforge.net/projects/openfoam-extend/files/OpenFOAM_Workshops/OFW2_2007_Zagreb/ Second OpenFOAM workshop] in Zagreb, 2007.
  
 
== Year 2006==
 
== Year 2006==
  
The planning of the group started at the [http://powerlab.fsb.hr/ped/kturbo/FsbOpenFOAMWorkshop/ first OpenFOAM workshop] in Zagreb, 2006.
+
The planning of the group started at the [http://sourceforge.net/projects/openfoam-extend/files/OpenFOAM_Workshops/OFW1_2006_Zagreb/ First OpenFOAM workshop] in Zagreb, 2006.
  
  
 
Back to [[Sig Turbomachinery]]
 
Back to [[Sig Turbomachinery]]

Latest revision as of 13:07, 25 March 2013

1 Year 2012

A meeting was held during the 7th OpenFOAM Workshop (Technische Universität Darmstadt, Darmstadt, Germany), on June 28. It should be noted that there was also a Turbomachinery training at OFW7, a training course held on June 25. There was also a Turbomachinery session held on June 26 (see OFWS7-programSchedule).

During the Turbomachinery meeting, there were presentations and discussions about the mixingPlane interface available under the git branch mixingPlane_RC1 under OpenFOAM-1.6-ext. The slides that were presented during the meeting are available under Workshop-Documents/CommunityDay/SIG_Turbo .

Agenda of the meeting:

The discussions were quite interesting about the behaviour of the current implementation of the mixingPlane interface during the meeting. Comments and inputs are welcomed.

2 Year 2011

A meeting was held during the 6th OpenFOAM Workshop (Penn State University, State College, Pennsylvania, USA), on June 16.

There has been an update on the mixingPlane interface development for steady-state computations and on the Timisoara Swirling Flow Test Rig Case-Study.

3 Year 2010

A meeting was held during the 5th OpenFOAM Workshop in Gothenburg, Sweden, on June 24, 2010. For more informations, see the Working Group Activities.

Two were two new testcases, the Timisoara Swirl Generator and the Single Pump Channel. More information can be found here: Timisoara Swirl Generator and Single Channel Pump.

There was an update for ERCOFTAC centrifugal pump with a vaned diffuser case-study. More information can be found here: ERCOFTAC centrifugal pump with a vaned diffuser.

The OpenFOAM Cavitation Modelling Working Group has started, as a subgroup activity of Hydro and Ship Hydro WGs.

4 Year 2009

A meeting was held during the Fourth OpenFOAM workshop in Montreal, Canada, on June 4 2009.

The second testcase is the ERCOFTAC centrifugal pump with a vaned diffuser case-study. More information can be found here: ERCOFTAC centrifugal pump with a vaned diffuser.

5 Year 2008

A meeting was held at the Turbomachinery session of the Third OpenFOAM workshop in Milano, July 10-11, 2008. The talks presented in the Turbomachinery session are directly available through Workshop Sessions

The first testcase is the ERCOFTAC conical diffuser case-study. More information can be found here: ERCOFTAC conical diffuser.

6 Year 2007

The group was officially started at the Second OpenFOAM workshop in Zagreb, 2007.

7 Year 2006

The planning of the group started at the First OpenFOAM workshop in Zagreb, 2006.


Back to Sig Turbomachinery