Difference between revisions of "Sig Turbomachinery / Organize the next meeting"

From OpenFOAMWiki
(Next meeting)
m
Line 16: Line 16:
 
- '''Contribution of the turboPerformance function object''' (M.Auvinen, Aalto University, Finland)
 
- '''Contribution of the turboPerformance function object''' (M.Auvinen, Aalto University, Finland)
  
- '''Update on the mixingPlane interface development for steady-state computations''' (M.Beaudoin, Hydro-Quebec, Canada)
+
- '''Update on the mixingPlane interface development for steady-state computations''' (M.Beaudoin, Hydro-Québec, Canada)
  
  
- '''In preparation : Cavitation modelling case-studies''' (M.Page, Hydro-Quebec and R.Bannari, Universite de Sherbrooke, Canada)
+
- '''In preparation : Cavitation modelling case-studies''' (M.Page, Hydro-Québec and R.Bannari, Université de Sherbrooke, Canada)
  
  

Revision as of 14:29, 5 May 2010

1 Next meeting

The next meeting will be held during the 5th OpenFOAM Workshop in Gothenburg, Sweden, on June 24, 2010.


As a preliminary schedule, the following talks are planned :


- Update on ERCOFTAC Centrifugal Pump Case-Study (S.Xie, O.Petit, H.Nilsson, Chalmers University of Technology, Sweden)

- New Case-Study : Timisoara Swirling Flow Test Rig ( O.Bergman, O.Petit, H.Nilsson, Chalmers University of Technology, Sweden)

- New Case-Study : Single-channel Pump ( M.Auvinen, J.Ala-Juusela, T.Siikonen, Aalto University, Finland, and N.Pedersen, Grundfos, Denmark)


- Contribution of the turboPerformance function object (M.Auvinen, Aalto University, Finland)

- Update on the mixingPlane interface development for steady-state computations (M.Beaudoin, Hydro-Québec, Canada)


- In preparation : Cavitation modelling case-studies (M.Page, Hydro-Québec and R.Bannari, Université de Sherbrooke, Canada)


- Multiphase turbulent flow simulation arounf foils, propellers, and pumps - Numerical and Physicals Modeling (SE.Kim, Naval Surface Warfare Center Carderock Division, USA)


Time will also be devoted for discussions.

2 Previous meetings

2009

A meeting was held during the Fourth OpenFOAM workshop in Montreal, Canada, on June 4 2009.

The second testcase is the ERCOFTAC centrifugal pump with a vaned diffuser case-study. It is located here: ERCOFTAC centrifugal pump with a vaned diffuser.

2008

A meeting was held at the Turbomachinery session of the Third OpenFOAM workshop in Milano, July 10-11, 2008. The talks presented in the Turbomachinery session are directly available through Workshop Sessions The first testcase is the ERCOFTAC conical diffuser case-study. More information is located here: ERCOFTAC conical diffuser.

2007

The group was officially started at the second OpenFOAM workshop in Zagreb, 2007.

2006

The planning of the group started at the first OpenFOAM workshop in Zagreb, 2006.


Back to Sig Turbomachinery