Sig Turbomachinery Utilities CGNS Converters
- 1 Introduction
- 2 Installing the CGNS converters
- 3 Testing the CGNS converters
- 4 Basic documentation
- 5 Caveat
- 6 Use cases
The CFD General Notation System (CGNS) file converters cgnsToFoam and foamToCGNS allow for the conversion back and forth between OpenFOAM cases and files in CGNS format.
The converters support:
- import and export of grid information
- importing structured and unstructured grid from CGNS format file
- exporting OpenFOAM grid format to unstructured grid CGNS format
- import and export of boundary conditions information, including periodic or cyclic BCs
- import and export of flow solutions
Using CGNS files, one can easily transfer CFD information like mesh and flow solutions between OpenFOAM and many commercial CFD applications (mesh generators, solvers, etc).
For more information on the CGNS file format, visit the following site: http://cgns.sourceforge.net/
2 Installing the CGNS converters
The CGNS file converters are available from the SourceForge.NET site http://openfoam-extend.wiki.sourceforge.net/ through a Subversion source code repository.
The converters source code currently resides in the Breeder section of the repository, under the TurboMachinery OpenFOAM Special Interest Group (OSIG) section.
For more information on the structure of the Subversion repository for the openfoam-extend project on SourceForge.NET, see the following presentation from the 2nd OpenFOAM Workshop: Open Subversion Repository Access For OpenFOAM
For browsing the openfoam-extend Subversion repository, follow this URL: http://sourceforge.net/p/openfoam-extend/svn/HEAD/tree/
The CGNS converters are based on the following components:
- cgnslib_2.5 : CGNS Mid-Level library
- cgnstools_2.5 : optional package from http://cgns.sourceforge.net/. Tools for viewing and editing CGNS files
- libcgnsoo_3.0 : C++ wrapper for the CGNS Mid-Level library
- cgnsToFoam : CGNS file conversion to OpenFOAM
- foamToCGNS : OpenFOAM conversion to CGNS file
2.1 Downloading the CGNS converters and companion libraries
The easiest way to retrieve the CGNS converters source code is to download the whole TurboMachinery section of the Breeder from the openfoam-extend Subversion repository.
- For OpenFOAM 2.0
cd $WM_PROJECT_USER_DIR svn checkout svn://svn.code.sf.net/p/openfoam-extend/svn/trunk/Breeder_2.0/OSIG/TurboMachinery
- For OpenFOAM 1.6
cd $WM_PROJECT_USER_DIR svn checkout svn://svn.code.sf.net/p/openfoam-extend/svn/trunk/Breeder_1.6/OSIG/TurboMachinery
- For OpenFOAM 1.5
cd $WM_PROJECT_USER_DIR svn checkout svn://svn.code.sf.net/p/openfoam-extend/svn/trunk/Breeder_1.5/OSIG/TurboMachinery
- For OpenFOAM 1.4.1
cd $WM_PROJECT_USER_DIR svn checkout svn://svn.code.sf.net/p/openfoam-extend/svn/trunk/Breeder/OSIG/TurboMachinery
It is also possible to download the converters, companion libraries and tutorial individually. Take note however that if the relative installation locations of the different converters components are modified, the files Make/options for cgnsToFoam and foamToCGNS will need to be adjusted accordingly.
For example, for OpenFOAM 1.5:
- The CGNS converters:
svn checkout svn://svn.code.sf.net/p/openfoam-extend/svn/trunk/Breeder_1.5/OSIG/TurboMachinery/applications
- The companion libraries:
- The test cases:
svn checkout svn://svn.code.sf.net/p/openfoam-extend/svn/trunk/Breeder_1.5/OSIG/TurboMachinery/tutorials
NB: For the remaining of this document, we will assume that the whole TurboMachinery section of the Breeder_1.5 was download in the directory $WM_PROJECT_USER_DIR
2.2 Compiling the companion libraries
cd $WM_PROJECT_USER_DIR/TurboMachinery/src ./Allclean ./Allwmake
Note that these libraries are installed locally under their respective directory. They are not installed under $FOAM_USER_LIBBIN.
2.3 Optional: compiling the CGNS Tools and Utilities
The cgnstools are useful for viewing and editing CGNS files.
You first need to compile the CGNS Mid-Level library provided by cgnslib_2.5. This library is normally compiled when building the companion libraries for the CGNS converters.
You will also need to make sure the Tcl/Tk runtime and development libraries are available on your workstation.
The recipe for compiling the cgnstools is:
cd $WM_PROJECT_USER_DIR/TurboMachinery/src/cgnstools_2.5 tar -zxvf ./cgnstools-2-5-2.tar.gz ./Allwmake
Note that the cgnstools are installed locally under $WM_PROJECT_USER_DIR/TurboMachinery/src/cgnstools_2.5/platforms/$WM_OPTIONS/bin. They are not installed under $FOAM_USER_BIN. You will need to adjust your PATH accordingly, or modify the Allwmake script to suit your needs.
Here are two snapshots taken from the tool 'adfviewer' while viewing the CGNS file provided as $WM_PROJECT_USER_DIR/TurboMachinery/tutorials/cgnsConverters/test1/icem_mesh.cgns
For more information about the cgnstools, please visit this site: http://www.grc.nasa.gov/WWW/cgns/cgnstools/index.html
2.4 Compiling the CGNS converters
cd $WM_PROJECT_USER_DIR/TurboMachinery/applications ./Allclean ./Allwmake
NB: The compilation of foamToCGNS requires the class pointVolInterpolation, which is available for OpenFoam-1.4.1-dev and OpenFOAM-1.5-dev, but not from the version distributed by OpenCFD.
In order to compile foamToCGNS under OpenFoam-1.4.1 and OpenFOAM-1.5 from OpenCFD, you need to make a small adjustment to the file cgnsToFoam/Make/options.
Here is the modification necessary for the file cgnsToFoam/Make/options under OpenFOAM-1.4.1:
// We need to define some pre-processor definition // in order to adjust for various versions of OpenFOAM. // Please adjust accordingly to your own installation. // // For your information, pointVolInterpolation is not part // of OpenFOAM 1.4.1 from OpenCFD, but can be found in the openfoam-extend // distribution on SourceForge.net. // So you need to specify -DMISSING_POINTVOLINTERPOLATION -I./compatibility for // compiling with OpenFOAM 1.4.1 from OpenCFD. // // c++FLAGS+= -DOPENFOAM_VERSION=141 -DMISSING_POINTVOLINTERPOLATION -I./compatibility // c++FLAGS+= -DOPENFOAM_VERSION=141 c++FLAGS+= -DOPENFOAM_VERSION=141 -DMISSING_POINTVOLINTERPOLATION -I./compatibility
Here is the modification necessary for the file cgnsToFoam/Make/options under OpenFOAM-1.5:
// We need to define some pre-processor definition // in order to adjust for various versions of OpenFOAM. // Please adjust accordingly to your own installation. // // For your information, pointVolInterpolation is not part // of OpenFOAM 1.5 // So you need to specify -DMISSING_POINTVOLINTERPOLATION -I./compatibility for // compiling with OpenFOAM 1.5 // c++FLAGS+= -DOPENFOAM_VERSION=150 -DMISSING_POINTVOLINTERPOLATION -I./compatibility // c++FLAGS+= -DOPENFOAM_VERSION=150
2.5 Building CGNS converters on Ubuntu 10.04 LTS
Add the PPAPPA repository from the CAE-TeamCAE-Team
sudo add-apt-repository ppa:cae-team/ppa
and update sources list:
sudo apt-get update
Install OpenFOAM®-ext 1.5 release:
sudo apt-get install openfoam-dev-1.5 openfoam-dev-1.5-dev openfoam-dev-1.5-doc
Additionally install automake and libtool packages:
sudo apt-get install automake libtool
Add alias command to ~/.bashrc to start-up OpenFOAM®-ext environment:
alias startOF15dev="source /usr/lib/OpenFOAM-1.5-dev/etc/bashrc"
Use OpenFOAM®-ext version 1.5 in bash console:
Follow standard instructions to build CGNS converters
3 Testing the CGNS converters
cd $WM_PROJECT_USER_DIR/TurboMachinery/tutorials/cgnsConverters ./Allclean ./Allrun
3.1 Test case: test1
A simple cgsnsToFoam conversion test case
3.2 Test case: test2
A foamToCGNS test case.
An example for converting periodic boundary conditions
3.3 Test case: test3
Reusing a foamToCGNS output (from test2) as an input for a cgsnsToFoam test case.
An example for converting periodic boundary conditions
4 Basic documentation
% cgnsToFoam --help Usage: cgnsToFoam <CGNS file> [-saveSolutions] [-cyclicRotX value] [-cyclicRotY value] [-cyclicRotZ value] [-mergeTolerance value] [-debug] [-dryrun] [-case dir] [-cfxCompatibility] [-cyclicMatchFaceTolFactor value] [-matchCyclicBC bc1_name:bc2_name] [-separatePatches] [-rho value] [-noMeshValidation] [-use2DElementsAsPatches] [-help] [-doc] [-srcDoc]
Command-line options for cgnsToFoam:
<CGNS file> CGNS filename -case dir Case directory -cfxCompatibility Activate the support of specific syntax for ANSYS CFX CGNS field names
-cyclicMatchFaceTolFactor value Tolerance factor for matching cyclic faces. Fraction of the smallest edge length.
Default value= 0.1
-cyclicRotX value Rotation angle for matching cyclic or periodic faces. Rotation about the X axis.
Value in degree.
-cyclicRotY value Rotation angle for matching cyclic or periodic faces. Rotation about the Y axis.
Value in degree.
-cyclicRotZ value Rotation angle for matching cyclic or periodic faces. Rotation about the Z axis.
Value in degree.
-debug Generate more verbose runtime information messages. -doc Not supported. -dryrun Process the CGNS file, but do not modify any files from the case. -help Print usage. -matchCyclicBC bc1_name:bc2_name Create a cyclic boundary condition using the patches named 'bc1_name' and 'bc2_name' -mergeTolerance value Tolerance factor for merging duplicate nodes. Fraction of the mesh smallest edge.
-noMeshValidation Disable the converter internal mesh validation (checkMesh) -rho value Value for the volumic density Rho.
: If present, the pressure field will be scaled by '1/value'.
-saveSolutions Extract and convert the solutions stored in the CGNS file as OpenFOAM fields -separatePatches For multi-zones CGNS files:
: If option present: save each zone boundary conditions as a separate boundary condition.
: If option not present: merge all boundary conditions sharing the same name.
-srcDoc Not supported. -use2DElementsAsPatches Lose all the boundary condition type information
% foamToCGNS -help Usage: foamToCGNS [-noZero] [-allowuserdefinedfields] [-exportcyclics] [-case dir] [-constant] [-rho value] [-latestTime] [-time time] [-help] [-doc] [-srcDoc]
Command-line options for foamToCGNS:
-allowuserdefinedfields Allow the conversion of non-supported OpenFOAM fields as CGNS user-defined fields -case dir Case directory -constant Explicitly includes the constant directory in the time list -doc Not supported. -exportcyclics Export cyclic boundary conditions as periodic CGNS patch.
: If the option is not present the cyclic BC will be split into two separate CGNS patches.
-help Print usage. -latestTime Restrict the conversion to the latest available time -noZero Explicitly excludes the 0 directory from the time list. -rho value Value for the volumic density Rho.
: If present, the pressure field will be scaled by 'value'.
-srcDoc Not supported. -time time Restrict the conversion to the data available for time 'time'
- A valid OpenFOAM case must first be created prior to using cgnsToFoam
6 Use cases
Work in progress...