Difference between revisions of "Talk:Tut reactingFoam firstTutorial"
From OpenFOAMWiki
m (→adaption to OpenFOAM-1.6) |
|||
Line 14: | Line 14: | ||
Any suggestions or a fix would be very appreciated. Thanks again. ~E | Any suggestions or a fix would be very appreciated. Thanks again. ~E | ||
+ | * another possibility could be to change the oxygen in the lowerInlet (in the the 0/O2 file) from 1.0 to (say) 0.9 or less and the nitrogen in the lowerInlet ( 0/N2) from 0.0 to 0.1 to cool down the reaction | ||
+ | * note: both suggestions are not validated, since I did not have that problem yet --[[User:Aortwein|Aortwein]] 15:29, 4 December 2009 (UTC) |
Revision as of 15:29, 4 December 2009
1 adaption to OpenFOAM-1.6
It is possible to use the tutorial in OpenFOAM-1.6 with some minor changes. I will try to make a list soon, starting here:
- a "g"-file is needed in the \constant directory, which can be used from the new aachenBomb-tutorial
--Aortwein 14:06, 4 December 2009 (UTC)
2 older question
Thanks for the tutorial, however, I am getting the following error in the third time step, and have not been able to find the problem:
--> FOAM FATAL ERROR : attempt to use janafThermo<equationOfState> out of temperature range 200 -> 5000; T = 5000.92#0
Any suggestions or a fix would be very appreciated. Thanks again. ~E
- another possibility could be to change the oxygen in the lowerInlet (in the the 0/O2 file) from 1.0 to (say) 0.9 or less and the nitrogen in the lowerInlet ( 0/N2) from 0.0 to 0.1 to cool down the reaction
- note: both suggestions are not validated, since I did not have that problem yet --Aortwein 15:29, 4 December 2009 (UTC)