Difference between revisions of "Talk:Tut reactingFoam firstTutorial"
From OpenFOAMWiki
| Line 15: | Line 15: | ||
Any suggestions or a fix would be very appreciated. Thanks again. ~E | Any suggestions or a fix would be very appreciated. Thanks again. ~E | ||
* another possibility could be to change the oxygen in the lowerInlet (in the the 0/O2 file) from 1.0 to (say) 0.9 or less and the nitrogen in the lowerInlet ( 0/N2) from 0.0 to 0.1 to cool down the reaction | * another possibility could be to change the oxygen in the lowerInlet (in the the 0/O2 file) from 1.0 to (say) 0.9 or less and the nitrogen in the lowerInlet ( 0/N2) from 0.0 to 0.1 to cool down the reaction | ||
| − | * note: | + | * note: my suggestion is not validated, since I did not have that problem yet, but the problem is also discussed here: [http://www.cfd-online.com/Forums/openfoam-solving/57945-reactingfoam-2.html at cfd-online.com] --[[User:Aortwein|Aortwein]] 15:29, 4 December 2009 (UTC) |
Revision as of 15:31, 4 December 2009
1 adaption to OpenFOAM-1.6
It is possible to use the tutorial in OpenFOAM-1.6 with some minor changes. I will try to make a list soon, starting here:
- a "g"-file is needed in the \constant directory, which can be used from the new aachenBomb-tutorial
--Aortwein 14:06, 4 December 2009 (UTC)
2 older question
Thanks for the tutorial, however, I am getting the following error in the third time step, and have not been able to find the problem:
--> FOAM FATAL ERROR : attempt to use janafThermo<equationOfState> out of temperature range 200 -> 5000; T = 5000.92#0
Any suggestions or a fix would be very appreciated. Thanks again. ~E
- another possibility could be to change the oxygen in the lowerInlet (in the the 0/O2 file) from 1.0 to (say) 0.9 or less and the nitrogen in the lowerInlet ( 0/N2) from 0.0 to 0.1 to cool down the reaction
- note: my suggestion is not validated, since I did not have that problem yet, but the problem is also discussed here: at cfd-online.com --Aortwein 15:29, 4 December 2009 (UTC)
