Difference between revisions of "Sig Turbulence / Collection of additional turbulence models"
Mirzapopovac (Talk | contribs) (→RANS) |
|||
Line 58: | Line 58: | ||
* Download | * Download | ||
{{VersionInfo}}{{Version1.5}} | {{VersionInfo}}{{Version1.5}} | ||
+ | |||
+ | === Transitional models === | ||
+ | ==== mykkLOmega model ==== | ||
+ | |||
+ | === Transitional models === | ||
== Hybrid RANS-LES == | == Hybrid RANS-LES == |
Revision as of 19:24, 27 October 2012
Contents
1 Comment
This site should be a collection of new implemented turbulence models
As soon as the model is stable and does not need any further developing, it should be marked and copied to svn.
2 Incompressible
2.1 RANS
Below is the description of the additional models that have been implemented into a single OpenFOAM library. The description on how to obtain these additional incompressible RAS models can be found here:
2.1.1 kOmega family
2.1.1.1 kOmega-SSTF
- Short description: [1]
- Problems / Difficulties with the implementation
- Literature
- Field of application
- Small Example Case: [2]
- Download: libaddedIncompressibleRASModels.so
2.1.2 v2f family
2.1.2.1 zeta-f0
- Short description: [3]
- Problems / Difficulties with the implementation
- Literature: [4]
- Field of application
- Small Example Case: [5]
- Download: libaddedIncompressibleRASModels.so
2.1.3 Models with advanced wall treatment
2.1.3.1 kOmega-SST (CWT)
- Short description
This model is based on the 'default' OpenFoam kOmegaSST implementation with some adjustemts to get an enhanced/compound wall treatment (similar to FLUENT). The implementation is based on Popovac/Hanjalic.
- Problems / Difficulties with the implementation
It seems to work for some meshes quite well (the range up to y+=0.3-10 and from 20- around 40 (?) works well, at least the results are similar to the default tutorial for the Launder-Sharma model; I did not test a u+/y+ view yet...). I would be nice, if you can test the model on your test case and give some suggestion for improvement!? Basically I just coupled the boundary conditions for omega, the turbulent kinetic energy production and viscosity for the low-Re and high-Re case using a function like exp(-Gamma). Right now, I set the values in the wall nearest cell (faceCelli), though I am not sure, if they have to get set at the boundary face (facei) as well!?
- Literature
Popovac, M., Hanjaliæ, K., 2007, Compound wall treatment for RANS computations for complex turbulent flows and heat transfer. Flow, Turbulence and Combustion, 78(2), 177-202
http://repository.tudelft.nl/file/354721/370010
- Small Example Case
This is aquite simple test case for RANS models based on the boundaryFoam tutorial. It should be quite simple to run.
- Download