Search results

The solvers that are supplied with OpenFOAM. This page is structured according to the d * [[potentialFoam]] Simple potential flow solver which can be used to generate starting fields for full Navier-Stokes

Contributed solvers == Solvers that fit into the OpenFOAM classification ==

...faces. Depends on whether the solver is for incompressible or compressible flow. ...enter" | incompressible flow: <math>\frac{m^3}{s}</math> <hr> compressible flow: <math>\frac{kg}{s}</math>

...lHeatFlux]]: Fixed Heat flux boundary condition for incompressible thermal flow under Boussinesq-Approximation * [[BSL_EARSM|BSL-EARSM]]: Library of incompressible/compressible BSL-EARSM turbulence model with for OF2.3.1 and OF4.1.

...to add his own implementations of a model (without modifying the original solvers) he can do so by adding the sources to the <tt>foamUser</tt>-library and re ...libraries '''in the case that uses them''' without modifying the original solvers/libraries.

...air flow injected into a container coupled with the heat transfer from the flow to and into the container walls. Numerically, at the end, this will be solv ==== Compressible fluid flow====

The sonicLiquidFoam program solves compressible flow typical of a liquid, where the equation of state is assumed to be a simple [[Category:Compressible flow solvers]]

''centralFoam'' is a compressible flow solver based on the family of central/central-upwind schemes. ...is still ongoing (in my free time) towards full viscous (incompressible & compressible, laminar & turbulent) capacity and to improve performance when computing in

...mployed in OpenFOAM. Besides, this also gives an understanding of both the flow calculations as well as the reaction calculations in OpenFOAM. #include "compressible/turbulenceModel/turbulenceModel.H"

Coodles is a generic single-phase compressible LES solver. The implemented sub-grid scale models are the following: [[Category:Compressible flow solvers]]

:::: International Journal of Multiphase Flow 25 (1999) pags. 1073-1097 '''Compressible Turbulence Models'''

...e flow (and its relative <code>buoyantPisoFoam</code> is meant for lightly compressible flows) so the coupling between density and pressure becomes very stiff. Mo ...y, <math>\rho_k</math>. Using the Boussinesq approximation for stratified flow, the effective kinematic density can be expressed as

* More than 30 solvers incl. CHT, multiphase, Lagrangian and reactions ! [http://www.sim-flow.com simFlow]

Low-compressible fluid: <math> Velocity magnitude and Mach number for compressible case are shown on figures 2.5 and 2.6

...online.com/Forums/openfoam-news-announcements-other/106881-solid-mechanics-solvers-added-openfoam-extend.html#post547754 here]: ...hould allow easier extension to other fluid/solid models e.g. multi-phase, compressible, plasticity, etc.

...93, 2001</ref>. It is possible that since this is not really compressible flow because the Boussinesq approximation is used, the maximum difference in tem ...be understood, for simplicity, by considering a one-dimensional, inviscid flow along the <math>x</math>-direction in which gravity acts in that direction

...solid boundaries and the influence of pyrolysis within the framework of a compressible solver able to consider combustion and radiation. ...-droplet gas-liquid flow simulations." International Journal of Multiphase Flow 24.6 (1998): 1025-1055.</ref> (see also https://trs.jpl.nasa.gov/bitstream/

...rk for different type of flows (different EoS, mesh motion, multicomponent flow, etc) and from non-oscillating flux reconstruction schemes, namely Kurgrano At the current moment, next solvers are present:

...al derivatives at face centers of unstructured grids and a set of OpenFOAM solvers: 1. '''QGDFoam''' - solver for compressible viscous perfect gas flows in a wide Mach number range - from 0 to infinity